Alternate Wall Installations - Friedrich PTAC ZONEAIRE PREMIER Service & Parts Manual

Alternate Wall Installations

Alternate Wall Installations
Figure 4
Panel Wall
OPTIONAL SUBBASE
LEVELING SCREW
Figure 5
Frame and Brick Veneer
WOOD FRAME
OPTIONAL SUBBASE
LEVELING SCREW
NOTE: Follow all wall system manufacturer installation instructions. For sunrooms and modular buildings, adhere to their installation instructions for
supporting and sealing sleeve to their frames. All wall and window/wall installations must provide for proper drainage. In applications where the
drain holes on the PTAC wall sleeve are not exposed beyond the wall an internal drain system is recommended. It is the installer's responsibility
to ensure there is adequate drainage for the PTAC unit.
62
INSTALLATION
FRP003
1/4" MIN
PROJECTION
STEEL
LINTEL
11" MIN.
WITH SUBBASE
FRP005
Figure 6
Curtain Wall
CASE FLANGE
(BY OTHERS)
OPTIONAL SUBBASE
LEVELING SCREW
Figure 7
Block and Brick Veneer
CONCRETE LINTEL
RECEPTACLE
FINISHED FLOOR
1/4" MIN
WALL OR
PROJECTION
WINDOW
FRP004
1/4" MIN
PROJECTION
STEEL
LINTEL
13-3/4" MIN.
WITHOUT SUBBASE
POWER SUPPLY CONDUIT
(SUPPLIED BY INSTALLER)
FRP006
7