Related Manuals for Westmed ANAPOD
Summary of Contents for Westmed ANAPOD
- Page 1 ANAPOD Instructions For Use 5580 S. Nogales Highway Tucson, AZ 85706 Phone: (800) 975-7987 Fax: (520) 294-6061 www.westmedinc.com...
- Page 2 PN 75292, Rev 01 Manufactured by Westmed, Inc. 5580 S. Nogales Highway Tucson, AZ 85706 USA Manufactured by Westmed, Inc. 5580 S. Nogales Highway Tucson, AZ 85706 USA...
-
Page 3: Table Of Contents
Westmed Inc. repair specialist. Contraindications ................... 7 Warranty: ANAPOD™ Controller is warrantied to be free of defects in material and workmanship for General Warnings ................a period of 1-year from date of purchase. -
Page 4: Description
Do not operate the Controller if damaged. Do not use in the presence of flammable anesthetic agents or flammable supple- mental gases. The ANAPOD™ should be used by personnel trained in use of heated humidification in a gas delivery system. General Warnings! A warning alerts you to possible injury. -
Page 5: Controls And Displays
A - Main power switch 2. To add water remove screw cap from water bottle included with ANAPOD™ circuit. Aspirate 20 ml B - Fuse (2A, 250VAC, slow blow) for Domestic (A2003-1) of water from the water bottle into syringe (Refer to Figure B). Attach syringe to the one-way valve - Fuse (1A, 250VAC, slow blow) for International (A2003) and inject 20 ml of water into the tube and circuit. -
Page 6: Controls
• Input Voltage: 120VAC +/- 10%, single phase, 50 – 60Hz for Domestic (A2003-1) O I On/Off switch: Turns the power on and off for both ANAPOD 240VAC +/- 10%, single phase, 50 – 60Hz for International (A2003) Humidification System and heated wick circuit •...
Need help?
Do you have a question about the ANAPOD and is the answer not in the manual?
Questions and answers