Philips Avent SCF393 Manual page 22

Single/double electric breast pump plus
Table of Contents

Advertisement

Available languages

Available languages

English
22
Storage and transportation
conditions
Operating and storage pressure
Net weight
External dimensions
Device classification
Materials
Service life
Mode of operation
Ingress protection
Electromagnetic compatibility - compliance information
This device has been tested and found to comply with IEC 60601-1-2:2014 Ed 4.0 for electromagnetic compatibility
(EMC) as Class B according to CISPR 11:2009. Tests levels are listed in the accompanying tables. Only use this Philips
Avent single/double electric breast pump Plus in combination with the adapter supplied.
Emissions
RF emissions
CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations / flicker
emissions IEC 61000-3-3
Guidance and manufacturer's declaration – electromagnetic immunity
The Philips Avent single/double electric breast pump Plus is intended for use in the electromagnetic environment listed
below. The user of the device should ensure that it is used in such an environment to prevent improper operation.
Single electric breast pump
Temperature: -25 °C to 70 °C (-13 °F to 158 °F)
Relative humidity: up to 90 % (non-condensing)
700-1060 hPa (<3000 m altitude)
230 g
Motor unit: 145 mm x 95 mm x 45 mm (LxWxH)
Applicable classifications:
Degree of protection against electric shock:
- Class II ME equipment
- Type BF applied part
The breast pump and the adapter are specified as medical electrical system
according to IEC 60601-1.
ABS, silicone (motor unit)
Polypropylene, silicone (other parts)
500 hours
Continuous operation
IP22 (motor unit), IP20 (adapter)
Compliance
Group 1
Class B
CompliesClass A Category
Complies
Double electric breast pump
310 g
Electromagnetic environment – guidance
The device does not use RF energy for its intended
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
The device is suitable for use in locations in
residential environments and in establishments
directly connected to a low voltage power supply
network which supplies buildings used for domestic
purposes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avent scf391

Table of Contents