Components - Navigation - Husqvarna K7000 Ring Workshop Manual

COMPONENTS – NAVIGATION
5
6
12
15
16
12
13
11
19
14
13
3
9
11
2
10
8
2
4 9 11
14
13
14
2
2
Components
1. Cutting blade – ring-shaped cutting
2. Engagement rollers (behind the
7 3. Blade guard
4. Spray guard
5. Hose for water connection
6. Cable for the HF unit
1
7. Water disc
8. Button for locking the rotation of
9. Knob for tensioning the blade to the
10. Transmission housing
11. Grease nipples for lubricating the
18
12. Support rollers (behind cover)
13. Adjustment screws for adjusting the
17
14. Lock nuts for roller adjustment
15. Drive wheel (behind the cover)
16. Support roller cover
17. Throttle
18. Starter inhibitor
19. Lubricating duct outlets
12
NOTE
In comparison to the hydraulically
driven cutter ring, Husqvarna K3600, the
engagement and support rollers have a
reverse position on K7000 Ring.
to the machine is the same for both
machines (pulling blade), but the actual
rotation of the cutting blade is the oppo-
site.
fore not be switched between the machines.
Changing the direction of rotation causes
increased wear of the blade.
12
blade with laser welded diamond
segments
cover)
the drive wheel
drive wheel
bearing housings
contact of the rollers with the blade
The blade's rotational direction relative
The same cutting blade should there-
3
5