Advertisement
4.2.2.
Switch unit "ON".
4.2.3.
Turn the switch to "30S" in the strip, when people move close to it in the dark, it will automatically light up. It will turn off
approximately 30 seconds after you leave.
4.2.4.
Turn the switch to "1M" in the strip, when people move close to it in the dark, it will automatically light up. It will turn off
approximately 1 minute after you leave.
4.2.5.
Switching the battery pack to "OFF" will stop the light from working.
4.3.
USE WITH A POWER BANK OR ADAPTOR
4.3.1.
Use a 5V-1A/2A power bank or a 5V-1A/2A USB plug adaptor.
Note:
When you first turn the battery to "ON" the lamp will light up, regardless of light conditions. After it turns off automatically, it will only
react in 'dark' light conditions (luminance < 20lux).
4.4.
LOCATING THE LAMP
4.4.1.
Put the sensor lamp inside your house, where you need some extra light.
4.4.2.
The best hanging height of the sensor lamp is 1.2m - 1.5m.
4.4.3.
Position the away from appliances such as refrigerator, stove, air conditioning etc, places where the temperature will change a lot.
DO NOT place on the other side of glass, curtains, or furniture, the lamp sensor will not work if obstructed.
8
DO NOT place the lamp so it is facing a window.
8
Note:
The sensitivity of sensor largely relates to the direction of movement. The best sensitivity is when you move parallel to the sensor.
The lowest sensitivity is moving in radial direction. So it's critical to seek the location of installation in order to up to the best
sensitivity and avoid the misinformation of infrared probe.
5. MAINTENANCE
5.1.
Remove Batteries if storing or not using for a long time.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
LEDSTR03 Issue 1 09/09/2020
Advertisement
