This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.ca.
» Do not use without filters in place. » Do not use for any purpose other than described in this user guide. Use only » Use only BISSELL® cleaning formulas intended for use with this appliance to manufacturer’s recommended attachments.
Accessory Bag and 3” Tough Stain Tool Nozzle Clean Out Tool Hose Assembly Go to support.BISSELL.ca for assembly videos. Insert the Upper Handle at Wrap cord around lower At the bottom of the Upper the top of the base until you cord wrap and release hook.
Removes pet stains. stains. pet odors. Removes pet odors with OXY. WARNING To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine. 4 BISSELL.ca...
Filling the Clean Water Tank More of a video person? Head to support.BISSELL.ca for helpful how-to videos. Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not use boiling water. Do not heat water or tank in microwave.
Cleaning Carpets and Area Rugs Visit support.BISSELL.ca for helpful how-to carpet cleaning videos. Tips Before Cleaning • Use a dry vacuum cleaner over area before using your deep cleaner. • To prevent damage to Berber carpets, avoid repeated strokes in the same area.
Cleaning with the Hose and Tool Visit support.BISSELL.ca for helpful tips and tricks on using your machine’s tools. Tips Before Cleaning • Check for colorfastness in an inconspicuous place before cleaning larger area. • If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
Emptying the Dirty Water Tank For helpful how-to videos about maintaining your machine visit support.BISSELL.ca. Pull Dirty Water Tank up For quick empty: Pull the For final clean and rinse: and away to remove. rubber tab (located in the Unscrew the ring at the bottom middle of the tank) and tilt to of tank.
After-Cleaning Care Visit support.BISSELL.ca for additional how-to videos on maintaining your machine. Turn OFF and unplug the Remove the nozzle from the Hold the nozzle and insert machine. foot by lifting up on the back the Nozzle Clean Out Tool into...
Storing Your Machine For more helpful maintenance tips, check out support.BISSELL.ca. Once your cleaning is complete, make sure both the Dirty and Clean Water Tanks are emptied, rinsed out and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a protected, dry area.
Troubleshooting Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit support.BISSELL.ca. Problem Possible Cause Remedies Clean Water Tank may be Refill tank. empty. Reduced Clean Water Tank may not be Turn power OFF.
Page 12
We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.
Need help?
Do you have a question about the POWERCLEAN DUALPRO PET 3072 and is the answer not in the manual?
Questions and answers