Canon EOS 1D Mark II N Instruction Manual page 36

Basic Operation
5
Using the <
5
The < > dial is used for AF point selection and selecting the desired
setting on the LCD monitor. This <
switch is set to <
There are three ways to use this <
36
> Dial
1
>.
(1) While pressing a button, turn the
5
<
(2) After pressing a button, turn the
5
<
When you press a button, its function
remains on for 6 seconds (
this time, you can turn the <
set the desired setting.
After the button turns off or if you press
the shutter button halfway, the camera
will be ready to shoot.
(3) Turn the <
While turning the <
setting in the viewfinder or on the top
LCD panel.
5
> dial works only when the <
5
> dial:
> dial.
In this way, you can select and set
various menu settings or set flash
exposure compensation. When you
let go of the button, the selected
setting takes effect.
You can also review and select images
on the LCD monitor with this dial.
> dial.
In this way, you can select the AF
point or set the exposure
compensation.
5
> dial only.
5
In this way, you can set the aperture in
the camera's manual exposure mode.
7
9
). During
5
> dial to
> dial, look at the
>