Sealey SG19.V2 Instructions

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to Wear eye
instruction protection
manual
1. saFetY
warning! disconnect the gun from the air supply before changing accessories, servicing or performing any maintenance.
‰
Wear eye protection, a mask, protective clothing and gloves.
9
locate the gun in an adequate working area for its function, keep area clean and tidy and free from unrelated materials, and ensure
9
there is adequate lighting.
Use in a well ventilated area away from sources of ignition. Ensure underseal/rust proofing fluid manufacturer's instructions are
9
carefully followed.
maintain the gun in good condition. replace or repair damaged parts. use recommended parts only. non authorised parts may be
9
dangerous and will invalidate the warranty.
Keep the gun clean and rinse out nozzle, quick-release coupling and suction pipes with suitable solvent after use.
9
warning! if gun components become blocked there is a danger of excessive pressure building up in unit causing the canister to
‰
burst.
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and contain long hair.
9
Keep children and unauthorised persons away from the working area.
9
When not in use ensure the air supply is turned off and the gun is disconnected. Avoid unintentional starting.
9
do not place attachments close to your face (especially eyes, ears, etc) and do not point hose at other persons or animals.
8
do not carry by the air hose, or yank the hose or the gun from the air supply.
8
do not use the gun for any purpose other than for which it is designed and do not fill with any other fluid or liquid.
8
do not operate the gun if damaged.
8
do not direct air from the air hose at yourself or others..
8
When not in use disconnect from the air supply and store in a safe, dry, child proof area.
9
2. introduction
suitable for most brands of wax rust inhibitor. supplied with nozzle for surface application and 910mm flexible probe for cavities.
3. speciFication
model no: .................................................................sG19.V2
recommended air pressure: ...................87-145psi (6-10bar)
Air consumption without extension: ........................... 13.4cfm
Air consumption with extension: .................................. 6.4cfm
Air inlet size:..............................................................1/4"BsP
optional rigid probe: .................................................... sG191
fig.1
© Jack sealey limited
instructions for
underseal gun with canister & extension
probe
model no:
Wear a mask
Wear
protective
gloves
fig.2
Original Language Version
sg19.V2
Wear
protective
clothing
fig.3
sG19.V2 | issue:3 (l) 05/09/17