Sealey Worksafe SSP78.V2 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
This face shield is designed for face and eye protection against high speed particles of low energy impact. The visor is designed to
9
be lightweight and comfortable to wear.
Use of this face shield is for face and eye protection against low energy impact and splashing liquids.
9
Inspect the face shield frequently as a pitted or scratched face shield reduces vision and therefore should be replaced immediately.
9
When necessary, use identical replacement parts contact your Sealey stockist.
9
DO NOT use if any part of the face shield is cracked or broken.
8
DO NOT place this product on a hot surface.
8
DO NOT use this face shield for protection against fine dust, gas, ultra violet or infra red radiation, ionising radiation, liquids under
8
pressure or other severe hazards.
DO NOT use this face shield against heavy impact hazards, the lens is breakable.
8
DO NOT use this face shield for welding, laser cutting or grinding.
8
2. INTRODUCTION
Ratchet adjustable headband with front and back padding for extra comfort. Polycarbonate visor for increased protection, stability and
durability. Stepped angle adjustment on visor which simply flips up out of the way when not in use. Can be used with standard glasses.
Premium quality for automotive, agricultural and industrial applications. Conforms to BS EN 166.
3. SPECIFICATION
MODEL NO: ......................................................... SSP78.V2
Consumable Parts: ............ SSP78.V2R - Replacement Visor
Lens Type: .................................................................... Clear
4. ADJUSTING THE MASK
© Jack Sealey Limited
DELUXE BROW GUARD WITH ASPHERICAL
POLYCARBONATE FULL FACE SHIELD
MODEL NO:
fig.1
Original Language Version
SSP78.V2, SSP78.V2R
SSP78.V2, SSP78.V2R Issue 1 05/08/2020