Sharp SA-BC2002I Operation Manual page 6

9. Remove the carafe to serve when finished brewing (about one minute after the
coffee stops dripping out.)
NOTE: The coffee you get will be less than the water you have added, as some water
is absorbed by coffee grounds.
10. When the process is finished, if you do not want to serve immediately, keep the
coffee maker energized, the coffee can be kept warm on the warming plate. The
appliance will shut off automatically after two hours from the "ON/OFF" button
being activated if it has not been manually disconnected at the completion of
brewing. For an optimum coffee taste, serve just after brewing.
11. Always turn the coffee maker off and disconnect the power supply when not use.
NOTE: Please take care when pouring hot liquids.
Brewing Delay
If you do not want the coffee maker to start operation
immediately, for example now it is 8:10 am, you hope that
the coffee maker will automatically start at 1:00 pm, first
follow steps 1 to 5 of above section, and then you can set
the automatic start function as follows:
1. Press "PROG" button one time, the word "CLOCK"
is showed at the up-right corner on display.
2. Press the "HR" and "MIN" button continuously to set the present time (real clock),
that is AM 8:10 (See Fig. 1).
NOTE: The time cycle is 12 hours.
3. Press "PROG" button once again and the word "TIMER" shows on up-left corner of
display.
4. Set the delayed starting time by pressing "HR" and "MIN" button repetitively, that is
01:00 PM (see Fig. 2).
5. Press "ON/OFF" button twice, the indicator of "AUTO" button illuminates. After a
while, the LCD will display the current clock. You may see the automatic start time by
pressing "PROG".
Coffee_Machine_6_lang.indb 5
Home Appliances
EN-5
Fig. 1
Fig. 2
2018-01-19 10:36:25