Cleaning & Maintenance - VonShef 13/283 US Instruction Manual

CLEANING & MAINTENANCE
CAUTION: Before carrying out cleaning or maintenance,
disconnect the appliance from the mains and allow to cool.
• To clean the MOTOR UNIT, wipe with a damp cloth. A multi-purpose spray cleaner may be used.
CAUTION: Do not use abrasives, harsh cleaning solutions or metal scourer pads as continued use will
scratch the surface and make subsequent cleaning more difficult.
WARNING! Do not immerse the MOTOR UNIT in water or any other liquid to clean.
• It is recommended that you wash the BLADE UNIT by hand using warm soapy water and a sponge.
• The BLADE UNIT may need to be left to soak in warm water for several minutes to remove any clogged
ingredients around the BLENDING BLADES.
CAUTION: Take extra care when cleaning the BLADE UNIT as it is very sharp. We recommend using a
small cleaning brush to avoid contact with the BLENDING BLADES.
TIP: To clean the BLENDING JARS, add a small amount of washing up liquid to the JAR and fill with warm
water. Attach the BLADE UNIT on top, then fit onto the MOTOR UNIT. Connect the appliance to the
mains for a few seconds to clean before disconnecting. Remove the BLENDING JAR/BLADE UNIT and
rinse thoroughly under running water.
• Wash the SPILL-PROOF LIDS in warm water with mild detergent. Leave to soak to remove any odours.
• Dry all removable components thoroughly before reassembling. Store the appliance in a dry place, out of
reach of children.
IMPORTANT: Always store the BLENDING JARS without the SPILL-PROOF LIDS or BLADE UNIT attached.
CAUTION: Do not use the BLENDING JARS to store food or blended ingredients. Do not freeze or
microwave.
6