Table of Contents
Advertisement
Available languages
Available languages
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 2.
□
Shut off the water supply.
□
Insert the faucet body through the hole in the
sink.
A
4
2
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Place the escutcheon (D) and the gasket (E) on
the bottom of the new faucet assembly (A).
□
Insert the faucet assembly (A) through the hole
in the escutcheon (D).
NOTE: Silicone sealant is required under the gasket (E).
A
D
E
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the PAULINA and is the answer not in the manual?
Questions and answers
Installed Paulina unit correctly less than 30 days ago. Unit works perfectly, but over the last week, the faucet has become extremely loose with no apparent way to tighten it. Quick assembly under sink is tight, but hook neck is very loose. I find no visa Lee way to tighten the neck. Please advise.