Gecko SSPA-1 SPA PACK Quick Reference Card

SSPA-1 SPA PACK
The Quick Reference Card provides a quick overview of your spa's main
functions and the operations accessible with your digital control pad.
Starting Pump 1:
Press Pump 1 key to turn Pump 1 on at low
speed. Press a second time to turn Pump 1
to high speed. A third time turns Pump 1 off.
A built-in timer automatically turns pump off
after 20 minutes, unless manually deactivated
first.
The "Pump 1" indicator lights up
when Pump 1 is on.
Starting Pump 2:
Press Pump 2 key to turn Pump 2 on. Pressing
a second time turns Pump 2 off. A built-in timer
automatically turns pump off after 20 minutes,
unless it has been manually deactivated.
The "Pump 2" indicator lights up when
Pump 2 is on.
Starting the blower:
Press Blower key to turn blower on. Press a
second time to turn blower off. A built-in timer
automatically turns blower off after 20 minutes,
unless it has been manually deactivated.
The "Blower" indicator lights up when
blower is on.
Turning the light on:
Press Light key to turn light on. Press a second
time to turn light off. A built-in timer automatically
turns light off after 2 hours, unless it has been
manually deactivated.
The "Light" indicator is displayed when
light is on.
with TSC-8 keypad
•
Quick Reference Card
•
Setting water temperature:
Use Up or Down arrow key to regulate water
temperature. The temperature setting will be
displayed for 5 seconds to confirm your new
selection.
The "Set Point" symbol indicates the
desired temperature, NOT the current
water temperature!
Water temperature can be adjusted by 1˚ incre-
ments from 59 to 104°F (15 to 40°C).
Automatic water heater start:
When water temperature is 1°F (0.5°C) lower
than the Set Point, the heater will automatically
turn on until water temperature reaches Set
Point plus 1°F (0.5°C).
The "Heater" indicator lights up when
the heater is on.
Economy mode:
Press Economy key to put system in Economy
mode. In this mode, the system will maintain
water temperature 20°F (11°C) below program-
med set temperature and display will alternate
between current water temperature and ''Econo"
message.