Self-Check Report/Inquiry Status/Imei Code And Firmware Version/Reset - King Pigeon RTU5034 User Manual

pwdGON##
5.3.6 Control the relay ON/OFF by SMS command
pwdCC
pwdDD
The relay close timer according to the before setting 5.3.3:
5.4 Others:
5.4.1 Self-check auto report SMS to the 1
pwdT#xxx#
xxx=000~999
xxx=000, default,no self-check auto report.
Auto report SMS including:
Relay status;
GSM signal value(full is 31,cellular signal weak if lower than 14)
Inquiry the self-check and auto-report time
pwdT#
5.4.2 Inquiry current status
pwdEE
5.4.3 Inquiry the GSM modules' IMEI code and firmware version
pwdIMEI#
5.4.4 RESET
Switch ON the device, insert into the reset hole with a pin,hold for about 5 seconds and release it.
This operation will reset the password to default 1234 and other parameters, but the authorized users numbers
will remain on the memory.
_________________________________________________________________________________________
A Professional GSM 3G M2M products manufacturer
and automation solution provider, since 2005.
Return SMS: Relay ON (or the SMS confirmation content which you modified before)
Return SMS: Relay OFF(or the SMS confirmation content which you modified before)
number. (unit: hour)
st
Reset button
Page 9 of 11
www.4G-RTU.com Support@GSM-Gate-Opener.com
pwdGOFF##
pwdGOTclose
Ver 1.7 File No.:RTU5034103
time#