Sealey AP2401 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this product.
‰
DO NOT open more than one drawer at a time.
8
DO NOT step on the drawers.
8
DO NOT let children near the tool chest.
8
DO NOT use in damp areas.
8
ensure drawers are fully closed and the self locking catch is activated before moving the tool chest.
9
Keep the work area clean and ensure there is adequate lighting.
9
WARNING! the warnings, cautions and referred to in this instruction manual cannot cover all possible conditions and situations that may
‰
occur. it must be understood that common sense and caution are factors that can not be built into this product, but must be applied by the
operator.
2. INTRODuCTION
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and
carry heavier loads. Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop. Added security
provided by side mounted cylinder locks, supplied with two keys. recessed handles permit units to be slotted in work environments where space
is tight. Rust and solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage.
tough composite top allows these units to be used as a workstation.
3. SPECIFICATION
model no
overall size
Width
depth
Height
Drawers (Qty)
drawer Width
drawer depth
drawer Height
AP2401
© Jack sealey limited
instructions for
TOP CHEST
model no's:
AP2401 AP2403
690mm
465mm
400mm 535mm
4 6
535mm
400mm
60mm
Original Language Version
AP2401 & AP2403
Optional Accessories
model no description
AP24ACC6 Drawer Divider 3 x 395 x 58mm
AP24ACC9 short Hook set x 10pcs
AP24ACC10 medium Hook set x 10pcs
AP2403
AP2401, AP2403| Issue:2 (L) 15/06/17