CNET CNFC-202 Specifications

TOTAL NETWORK SOLUTIONS
CNet media converters are hybrid-networking devices compliant to IEEE 802.3u standard. These products offer an
easy to deploy interconnection between copper and fiber networks. The 6 converters listed below are for copper to
single/multimode fiber cable and SC/ST/MT-RJ types of connectors.

Key Features

=
Operates at maximum packet filtering and
forwarding rate for 100Mbps: 148800pps.
=
Auto-Negotiation Full/Half duplex on TP port.
=
Convert twisted pair media interfaces to fiber
or vice versa.
=
Comply with IEEE 802.3u 100BASE-TX,
100BASE-FX.
=
Interoperable with 100BASE-TX/FX hubs or
switches.
Product Name
Fiber Mode
Wave Length
FX Connector
Fiber Cable*
Fiber Length**
Full/Half
TP Ports
UTP Cable ***
LED Indicators
Power
Net Weight
Delay Time
* Recommended fiber cable
Specifications are subject to change without notice
Ethernet Media Converter
CNFC-202CS, CNFC-202TS : SINGLE-MODE
CNFC-202CM, CNFC-202TM : MULTI-MODE
1310nm
CNFC-202CS, CNFC-202CM : SC type.
CNFC-202TS, CNFC-202TM : ST type.
CNFC-202CS, CNFC-202TS : 9/125 µm
CNFC-202CM, CNFC-202TM : 62.5/125 µm
CNFC-202CM, CNFC-202TM : 2 km
CNFC-202CS : 15 km
CNFC-202TS : 60 km
Selector
Shielded RJ45
CAT 5 UTP cable (100m max.)
Power : PWR (Power ON/OFF)
TP & Fiber: LK/ACT (Link/Activity)
TP & Fiber: FULL (Full/Half)
External AC/DC required, 9VDC, 1A
350g
315 nsec
CNFC-202 10/100-TX
TO
www.cnetusa.com
Trademarks & Trade Names belong to their owners
100-FX C
ONVERTERS