Advertisement
Quick Links
Barracuda CloudGen Firewall
F1000 Revision A
https://campus.barracuda.com/doc/71862294/
The Barracuda CloudGen Firewall F1000 is available in four different sub-models. Each model offering
a different setup of port modules. The Barracuda CloudGen Firewall F1000 has four different NIC
module bays that can be equipped with the following field replaceable Barracuda Network Modules:
M1001
M1002
M1003
M1004
F1000 Rev. A Model CE0 (16x1 GbE RJ45 and 4x10GbE SFP+ Optical Fiber)
F1000 Rev. A Model CE2 (32x1GbE RJ45 Ethernet and 8x10GbE SFP+ Optical Fiber)
F1000 Rev. A Model CFE (16x1GbE RJ45 Ethernet, 16x1GbE SFP Optical Fiber, and 8x10GbE SFP+ Optical Fiber)
F1000 Rev. A Model CFEQ (16x1GbE RJ45 Ethernet, 16x1GbE SFP Optical Fiber, and 6x10GbE SFP+ Optical Fiber, 2x
40GbE QSFP+)
F1000 Revision A
1 / 8
Advertisement
Related Manuals for Barracuda CloudGen Firewall F1000 CE0
Summary of Contents for Barracuda CloudGen Firewall F1000 CE0
- Page 1 The Barracuda CloudGen Firewall F1000 is available in four different sub-models. Each model offering a different setup of port modules. The Barracuda CloudGen Firewall F1000 has four different NIC module bays that can be equipped with the following field replaceable Barracuda Network Modules:...
-
Page 2: Default Port Configuration
Warranty and Safety Instructions Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks Technical Support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions The CloudGen Firewall hardware appliances ship with a Quick Start Guide. - Page 3 Barracuda CloudGen Firewall Data Storage RAM [GB] Mass Storage Type Size [GB] 550 GB or higher Size, Weight, Dimensions Appliance weight [kg] Carton weight with appliance [kg] Appliance size: width x depth x height [mm] 432 x 626 x 88...
- Page 4 The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks CloudGen Firewall or CloudGen Control...
- Page 5 Barracuda CloudGen Firewall Appliance is either booting, Blinking Status LED front side - shutting down, or slowly (1/s Normal installation. GREEN performing a system interval) update. After a hotfix installation, the LED Appliance is halted and may turns to red until the next reboot...
- Page 6 IP address and subnet mask appliance. Time and date Shows time and date currently configured on the appliance. Uptime of Barracuda OS The uptime in days, hours and minutes. Serial number of the appliance Unique identifier for the appliance. Shutdown menu Enables you to shut down the appliance.
- Page 7 Once set, this flag can not be deleted through the menu. When Menu to boot into during rebooted, the appliance will not start Barracuda OS, but ART the next reboot instead. You may connect to the appliance by using the serial console or by SSH.
- Page 8 Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the CloudGen Firewall F1000 CE0 and is the answer not in the manual?
Questions and answers