Advertisement
Available languages
Available languages
EN
1. UPDATING THE KS-06 OR WA-66R AMPLIFIER FIRMWARE:
• Save the file "Update KS-06 & WA-66R.MVA" in the root of a USB pendrive with no other files.
• Connect the USB pendrive to the KS-06 or WA-66R amplifier. Wait 30 seconds while it automatically
updates. (dashes will appear on the screen).
• Remove the USB pendrive.
• Switch the KS-06 or WA-66R amplifier on and off to save the changes.
2. SOFTWARE: Allows the bluetooth name and password to be changed, as well as the maximum volume
of the amplifier.
The configuration can be changed using the PC software.
- Open the folder containing the PC software (the folder contains the program and its libraries).
- Execute the software in a PC (execute the file "FONESTAR_KS-06_Configuration.EXE").
- Connect the computer to the KS-06 or WA-66R amplifier with a USB cable. ("PC" will appear on the screen)
- Once detected, the "Configure" software buttons will be activated. If not, they remain deactivated (in grey)
a) CHANGING THE NAME OR PASSWORD
o Enter the NEW name and/or the NEW password to access the Bluetooth connection.
o Press the "Configure" button and the message "Configuration success" will appear.
o Disconnect the USB cable.
o Switch the KS-06 or WA-66R amplifier on and off to save the changes.
b) CHANGING THE MAXIMUM VOLUME
o Indicate the NEW percentage of maximum volume required.
o Press the "Configure" button and the "Configuration success" message will appear.
o Disconnect the USB cable.
o Switch the KS-06 or WA-66R amplifier on and off to save the changes.
NOTE: in order to configure the PC software, firstly it is necessary to update the device's firmware
(1) and after that the software parameters can be modified (2)
Advertisement
Table of Contents
Related Manuals for FONESTAR KS-06
Summary of Contents for FONESTAR KS-06
- Page 1 - Execute the software in a PC (execute the file “FONESTAR_KS-06_Configuration.EXE”). - Connect the computer to the KS-06 or WA-66R amplifier with a USB cable. (“PC” will appear on the screen) - Once detected, the “Configure” software buttons will be activated. If not, they remain deactivated (in grey) a) CHANGING THE NAME OR PASSWORD o Enter the NEW name and/or the NEW password to access the Bluetooth connection.
- Page 2 1. ACTUALIZACIÓN DEL FIRMWARE DEL AMPLIFICADOR KS-06 O WA-66R: • Guardar el archivo “Update KS-06 & WA-66R.MVA” en un pen-drive USB, sin otros archivos y en la carpeta raíz. • Conectar el pen-drive USB en el amplificador KS-06 o WA-66R. Esperar 30 segundos mientras se actualiza automáticamente.
- Page 3 1. ACTUALISATION DU FIRMWARE DE L’AMPLIFICATEUR KS-06 OU WA-66R: • Garder le fichier “update KS-06 et WA-66R.mva” dans un pen-drive USB, vierge dans le dossier principal • Connectez le pen-drive USB à l’amplificateur KS06 ou WA-66R. Attendez 30 secondes pendant l’actualisation automatique.
Need help?
Do you have a question about the KS-06 and is the answer not in the manual?
Questions and answers