Advertisement
1.4.
SAFETY REQUIREMENTS FOR COMBINATION/EXTENDING LADDERS
DO NOT climb above the rung or tread recommended of the combination ladder used in a standing position, with extending ladder at
8
the top. The minimum requirement shall always be: DO NOT climb above the top four steps/rungs.
Locking devices shall be checked and be fully secured before use if not operated automatically.
9
2. INTRODUCTION
Aluminium extension ladders manufactured to EN 131 standards. Ideal for the tradesman, this ladder can be used as a three section or two
section extension and as a single ladder, which is ideal for two-man use. Can be used as a step and extension step ladder where stability and
height are needed. Compact size for easy handling and storage.
3. SPECIFICATION
Model no ..................................................................ACL3.V4
Max. capacity ............................................................... 150kg
Max. extension ............................................................. 5.92m
Max. reach ................................................................... 6.82m
Min. height ..................................................................... 2.6m
Model no ..............................................................ACL307.V2
Max. capacity ............................................................... 150kg
Max. extension ............................................................... 4.2m
Max. reach ..................................................................... 5.1m
Min. height ........................................................................ 2m
Model no. .............................................................ACL312.V3
Max. capacity ............................................................... 150kg
Max. extension ............................................................. 7.88m
Max. reach ................................................................... 8.78m
Min. height ..................................................................... 3.4m
4. ASSEMBLY
4.1.
FIT FOOT refer to fig.1
Note: Foot must always be fitted in use.
4.1.1.
Pull plastic feet from bottom of both ladder legs.
4.1.2.
Place foot in cut out section of both feet and re-insert into legs.
4.1.3.
Secure through leg and plastic feet with screw, nut and washer, of both legs.
5. MAINTENANCE
5.1.
Keep ladder clean. Repairs must be performed by suitably trained operatives only.
5.2.
Store out of direct sunlight.
5.3.
.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
ACL3.V4, ACL307.V2, ACL312.V3, Issue:3 (1) 02/07/20
Typical configurations
for all ladders
(Model shown ACL3.V4)
Advertisement
