Advertisement
5.3
Attach Spot Spray Gun Hose to pump (see fig.2)
5.3.1
Slide the hose clamp over the hose.
5.3.2
Push the hose onto the pump.
5.3.3
Slide the hose clamp over the pump connector and tighten.
fig.2
5.4
Attach Hose Guide to Tank (see fig.3)
5.4.1
Thread the hose through the hose guide.
5.4.2
Attach the guide to the side of the tank using the flange bolt.
fig.3
5.5
Attach Hose to Spot Spray Gun (see fig.4)
5.5.1
Slide the hose clamp over the hose.
5.5.2
Push the hose onto the hose barb on the spray gun.
5.5.3
Slide the hose clamp around the hose barb and tighten.
5.6
Attach Broadcast bracket to Tank (see fig.5)
5.6.1
Ensure the bracket is fixed with the two clips at the end
facing the pump.
5.7
Assemble Broadcast Kit. (see fig.6)
5.7.1
Insert the broadcast lance into the bracket, note the
orientation in fig.6.
5.7.2
Screw on the hose connector to the pump, tighten by hand
then using a spanner turn once more.
5.7.3
Slide two hose clamps over the hose.
5.7.4
Push the hose onto the hose barb on the broadcast lance
and onto the connector on the pump.
5.7.5
Slide the hose clamp around the hose barbs and tighten.
5.8
Attach the sprayer to the vehicle (see fig.7)
5.8.1
Use the hooked straps supplied to secure each end to an
fig.4
ATV rack (not supplied)
fig.7
Original Language Version
fig.5
fig.6
SS60, SS98
Issue: 1 - 23/11/11
Advertisement
