Smittybilt SB2843 HD Installation Instructions Manual

NOTE: Carefully read entire instructions thoroughly before attempting to install this part.
Parts Included
HD Tire Carrier
93-9183 Tire Mount Bracket Base
93-9187 Tire Mount Bracket
93-356CA100 Tire Gate Mount
90-4560 Wheel Mount Stud: 1/2"-20
90-4219 Lug Nuts: 1/2"-20
90-6913 Hardware Pack:
10mm-1.0 X 30mm Hex Head Bolt Gr. 8.8
10mm Nylock Nut
10mm Flat Washer
INSTALLATION:
Step 1: Place the vehicle on a flat, level surface and engage the parking brake.
Step 2: Remove the spare tire and unbolt and remove the OE rear tire mount from the rear
gate. Remove the OE third brake light assembly according to manufacturer's specifications.
Step 3: Carefully, remove the upper and lower OE plastic rear gate hinge covers. (Fig. A)
Rear Gate
Plastic Hinge
Cover
For Technical Support/Warranty Information please call 310-762-9944
Wheel Mount
Smittybilt, 400 W Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB2843 HD)
2007-2014 Jeep JK HD Tire Carrier Kit
Qty Parts Included
12mm-1.75.X 35-40mm Hex Head Bolt Gr. 8.8
1
12mm– 1.75 Nylock Nut
1
12mm Flat Washer
1
6mm-1.0 X 20mm Hex Head Bolt Gr. 8.8
1
6mm– 1.0 Nylock Nut
3
6mm Flat Washer
3
8mm-1.25 X 40mm Hex Head Bolt Gr. 10.9
1
8mm Flat Washer
5
5 8mm Lock Washer
10
Third Brake Light Lower Bracket
Third Brake Light Upper Bracket
Rear Gate
OE Hinge
Fig. A
Revised 9.3.15
Qty
4
4
4
4
4
8
8
8
8
1
1