Part 3: Installation - Modena BZ 1014 User Manual Book

3. Evaporation area: it is situated inside the refrigerated compartment in the rear and is characterized by the
evaporating unit.
4. Storage area: it is situated inside the refrigerated compartment and is destined for the cooling and/or freezing
of food stuffs.
The lower part is also distinguished by a control panel (A) that allows access to the electric parts; there is a
vertically-opening door in the front, which closes the refrigerated compartment hermetically. Depending on
requirements, the appliance is produced in several versions.

BZ 1005
This model is suitable to contain 5 trays with blast chilling capacity of 18kg and shock freezing capacity of
14kg.

BZ 1010
This model is suitable to contain 10 trays with blast chilling capacity of 40kg and shock freezing capacity of
28kg.

BZ 1014
This model is suitable to contain 14 trays with blast chilling capacity of 55kg and shock freezing capacity of
38kg.
A. Packaging and unpacking
Handle and install the appliance by following the information provided by the manufacturer, shown on the
packaging, the appliance and in this manual book.
The lifting and transportation system of the packaged product envisions the use of a fork -lift truck or a pallet
stacker. When using these, particular attention must be paid to balance the weight to prevent the risk of overturning
(avoid excessive tilting).
ATTENTION: When inserting the lifting device, pay attention to the positions of power supply cable
and the feet.
The packaging is made of cardboard and the pallet of plywood. A series of symbols is printed on the cardboard
packaging in accordance with international standards, the provisions to which the appliances are subjected during
loading, unloading, transport and storage.
Ensure that the packaging is intact and has not undergone any damage during transportation.
The transportation company must be notified of any damage immediately.
The appliance must be unpacked immediately to check the condition. Do not cut the cardboard with sharp tools to
prevent damage to the steel panels underneath.
Pull the cardboard packaging upwards.
After unpacking the appliance, ensure the features correspond with the requested ones on the order. Contact
MODENA Call Center immediately if any a incompatibility occurs.
Packaging elements (nylon bags, polystyrene foam, staples ) must be kept away from children.

Part 3: Installation

5