Error Messages - Sony DSRM-E1 Operating Instructions Manual

Appendix

Error messages

Error Error Message
Number
11 BACK UP BATTERY
LOW
21 • PLAYER: NO
RESPONSE FROM
VTR
• RECORDER: NO
RESPONSE FROM
VTR
22 • PLAYER: LANC
CONNECTION ERROR
• RECORDER: LANC
CONNECTION ERROR
23 PLAYER: CANNOT
READ COUNTER/TIME
CODE
31 PLAYER:
INCOMPATIBLE
COUNTER/TIME CODE
PLAYER:
32
INCONSISTENT
COUNTER/TIME CODE
41 • PLAYER: LANC
CONNECTION ERROR
• RECORDER: LANC
CONNECTION ERROR
42 EN
If the error messages appear, check the following list. These
messages will disappear when you press SEL/PUSH
EXECUTE botton to confirm.
Cause
The backup battery is
weak.
The unit has stopped
program editing because
the indicated video
equipment dose not
operate.
• The unit has stopped
program editing
because the indicated
video equipment
stopped.
• There is an unrecorded
section of tape on the
player.
• The recorder has
reached the end of tape.
The counter of the video
device cannot be read, or
there is an unrecorded
section of tape on the
player.
The unit has stopped
program editing because
the indicated player's
counter is different from
that of the program.
There are different
counters in the program.
The unit has stopped
program editing because
it cannot control the
indicated video
equipment.
Remedy
Change the backup
battery.
Check the connection of
the video equipment, or
the tape in it.
Check the status of the
video equipment.
Check the connection of
the player, or the tape in
it.
Change the counter to
that of the program.
Change the counter of
the player and revise the
program.
• Check the connection.
• Turn on the power of he
indicated video
equipment.
• Set the recorder control
system.
(Continued)