Motorola 592HSMTB User Manual page 10

1.3 Smart
1）When the Smart function is enabled, the temperature of the fresh food compartment is controlled at 4℃, and
that of the freezer compartment at - 18℃, so that foods can be stored in the best condition while the
refrigerator is running more efficiently and with better performance.
Under the Smart mode, the fresh food fridge compartment temperature and the freezer
compartment temperature are subject to no change.
2）Enabling the Smart function
Press the Function key to select Smart until the corresponding icon gets flickering, and then press the OK key
◆
within 5s for confirmation. If the OK is not pressed within 5s, the setting will be invalidated.
3）Exiting the Smart function
Under the Smart mode, press the Function key to select Smart until the corresponding gets flickering, and
◆
then press the OK key for confirmation. The Smart function will get exited.
When the Fast Freeze function is enabled, the Smart function will be disabled automatically.
◆
1.4 Child Lock
When the Child Lock function is enabled, the temperature and function are subjected to no change to prevent
mal operation.
1） In case of no key operation within 3 minutes, the Child Lock function will be enabled automatically.
2） Exiting the Child Lock function manually
Press and hold down the Unlock for 3s, then the Child Lock function can be disabled.
◆
1.5 Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will be continuously buzzed, which can be stopped
when any key is pressed, but will be restored after 3 minutes if the door is kept open. The alarms will not be
lifted until the door is closed.
1.6 Power cut memory
In the case of power failure, the refrigerator will maintain the running state that is set before the power outage
when the power supply is restored.
1.7 Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e.,
less than 5 minutes), the compressor will not be started immediately after it is powered on.
1.8 Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher than -10℃, digits of the
freezer zone get flickering on the display. The freezer temperature can be displayed when any key is pressed,
and the normal display will be restored when any key is pressed again or after 10s.
1.9 Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the operation panel, it indicates fault with the refrigerator. Please
contact the brand help desk for such cases.
8
8