Column Temperature; Heatsink Temperature - Agilent Technologies 1260 User Manual

Column Temperature

Error ID: 2836
The temperature of the column heat exchanger has exceeded the maximum
limit.
Column Temperature 0: left heater.
Column Temperature 2: right heater.
For safety reasons, the maximum column heat- exchanger temperature is
105 °C. If an electronic failure occurs which causes the heater to heat
continually, the current is switched off when the temperature exceeds
105 °C, and the error message is generated.
Probable cause
1
2

Heatsink Temperature

Error ID: 2837
The temperature of the Peltier heatsink has exceeded the maximum limit.
Heatsink Temperature 0: left heater.
Heatsink Temperature 2: right heater
The maximum temperature of the Peltier heatsink is 70 °C. If an
electronic failure occurs which causes the heatsink to reach 70 °C, the
current is switched OFF and the error message is generated.
Probable cause
1
2
Agilent 1260 Infinity TCC User Manual
Defective heater assembly.
Defective TCC board.
Defective heater assembly.
Defective TCC board.
TCC Error Messages
Suggested actions
Please contact your Agilent service representative.
Please contact your Agilent service representative.
Suggested actions
Please contact your Agilent service representative.
Please contact your Agilent service representative.
7
Error Information
75