Epson EV-110 User Manual page 128

Projector Setup Settings - Extended Menu
Setting Options
GPI-1 Settings
GPI-2 Settings
GPI Info.
Multi-Projection
Multi-Projection
Projector ID
Description
Low -> High/High -> Low: set the
operation to be executed when the sensor
signal exceeds or falls below a certain
voltage. Select the Low -> High setting to
select the operation for when the sensor
signal exceeds a certain voltage. Select the
High -> Low setting to select the
operation for when the sensor signal falls
below a certain voltage.
• Favorite Playlists: set which playlist to
play when you have selected the Start
Playlist setting.
• Source: set the image source when you
have selected the Source Select setting.
• Combination: set the settings for the
combination of GPI-1 and GPI-2
signals.
• Hold High/Hold Low: set how long
the High or Low signal is held before
executing the selected operation.
Displays the current value for GPI-1 and
GPI-2.
Make settings when projecting from
multiple projectors:
Set to On to match the display quality of
multiple projectors. When set to On, the
following are automatically set to prevent
unevenness on the right and left screens.
s Image > Dynamic Contrast > Off
s Settings > Brightness Settings >
Light Source Mode > Custom
Assigns an ID for the projector when you
use multiple projectors.
Setting Options
Color Mode
Color Uniformity
Edge Blending
Scale
Brightness Settings
Color Matching
Reset
Schedule Settings To Schedule
Settings menu
Language Various languages
available
128
Description
Adjusts the vividness of image colors for
various image types and environments.
When using multiple projectors, make
sure you select the same color mode for
all of the projectors.
Adjusts the color tone balance for the
whole screen.
Corrects a border between multiple
images to create a seamless screen.
Adjusts the scale of the image displayed
by each projector.
Selects the brightness mode of the
projector.
Corrects the difference between the tint
and brightness of each projected image.
Resets all adjustment values for the
Multi-Projection menu to their default
settings.
Schedules projector events to occur
automatically at selected dates and times.
Select the language for projector menu
and message displays.