Table of Contents
Advertisement
Oiling
1. Remove the power supply plug from the outlet.
2. Put 2 to 3 drops of oil at each of the points
indicated in fig. A.
3. After oiling, run the machine at a fast speed
without thread installed for a short time.
4. Be sure to wipe any excess oil off the machine.
NOTE:
The machine should be oiled once a week if it is used
more than one hour a day. If the machine is used
more often, oil every day.
Sewing machine oil is available from your local
sewing machine dealer or service center.
A
Engrasado
1. Desenchufe la máquina.
2. Ponga 2 ó 3 gotas de aceite en cada uno de los
puntos señalados en la fig. A.
3. Después de lubricar la máquina, hágala funcionar
rápidamente un instante y sin hilo.
4. Asegúrese de limpiar cualquier exceso de aceite
de la máquina.
NOTA:
Lubricar la máquina una vez por semana si se usa
más de una hora diaria. Si se usa más a menudo,
engrasarla cada día. Puede comprar aceite para
máquina de coser a su representante o en el centro
técnico local.
42
43
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XL-3010 and is the answer not in the manual?
Questions and answers
What size bobbin does the Brother XL 3010 require?
The Brother XL3010 sewing machine uses plastic replacement bobbins, as mentioned in the product description for compatible bobbins. However, the specific size of the bobbin is not explicitly stated in the provided context.
This answer is automatically generated
if parts are missing can they be replaced
Yes, replacement parts for the Brother XL-3010 sewing machine, such as the Snap On Zig Zag Presser Foot, are available.
This answer is automatically generated
Button holes
To make buttonholes with the Brother XL-3010 sewing machine, follow these steps:
1. Mark the Buttonhole – Use tailor’s chalk to mark the position and length of the buttonhole on the fabric.
2. Attach the Buttonhole Foot – Install the buttonhole foot and push the silver frame back until it stops, ensuring the plastic insert is in front of the metal frame.
3. Sew the Front Bar Tack – The front bar tack will be sewn first. Place the fabric under the presser foot so that the center of the buttonhole aligns correctly.
For soft fabrics, place stabilizer material underneath to improve stitching quality.
This answer is automatically generated