Related Manuals for Secura QLTK1
Summary of Contents for Secura QLTK1
- Page 1 QLT K1 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. US: 800-359-5520 • EMEA P: 0800 056 2853 We’re ready to help! Scan for easy install video san.us/1144...
- Page 2 Use with products Yes? This mount is NOT compatible. weigh MORE than heavier than the maximum weights indicated may result Visit secura-av.com or (49.8 kg) call US: 800-359-5520 in collapse of the mount and its accessories, causing 110 lbs. (49.8 kg) ? EMEA P: 0800 056 2853 to find a compatible mount.
-
Page 3: Wall Plate
Dimensions TV INTERFACE 7.87in .59in [200mm] [15mm] 1.81in [46mm] 15.98in [406mm] 23.62in [600mm] WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 5° 8° 24.17in 10° [614mm] 8.03in 6.22in [204mm] [158mm] 5.07in 8.74in [129mm] [222mm] 3.60in 16.06in .35in [91.3mm] [408mm] [9mm] 25.59in... -
Page 4: Parts And Hardware
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. - Page 5 Parts and Hardware for STEP 2 Accessories Wall Plate Surge Protector Hook and Loop Cable Ties Lag Bolts 5/16 x 2¾ in. 5/16 x 2¾ in. Washers (Lag Bolt) 6 ft HDMI Cable 5/16 in. 5/16 in. For concrete installations ONLY For concrete installations ONLY CAUTION CAUTION...
-
Page 6: Step 1 Attach Brackets To Tv
STEP 1 Attach Brackets to TV 1.1 Select Angle of TV Tilt Using the preattached angle brackets, TV can be set to either a 10° or 8° tilt. 10° Tilt 8° Tilt... - Page 7 For no tilt, remove the preattached angle brackets. 5° Tilt For 5° tilt, remove the preattached angle brackets, rotate the brackets as shown and reattach the brackets. 0° Tilt...
- Page 8 Standard configurations 1.2 Select TV Screw Diameter 1.3 Select TV Screw Length are shown. For special Hand thread screws into the threaded inserts If your TV has a flat back AND you want your TV closer to applications, or if you on the back of your TV to determine which the wall, use the shorter screws (a).
- Page 9 1.4 Attach TV Brackets Place your TV brackets over your TV mounting holes. Ensure that your TV brackets are level, and vertically centered or close to centered. Install using the TV screw/washer/spacer configuration you selected for your TV. CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to secure the TV bracket to the TV.
- Page 10 STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall, must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm) ●...
- Page 11 Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 2¾ in. (70 mm). Be sure to drill into the center of the studs. Install wall plate using four lag bolts and four washers .
- Page 12 STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injury or property damage! ● Mount the wall plate assembly directly onto the concrete surface. ● Minimum solid concrete thickness: 8 in. (203 mm) ●...
- Page 13 Insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install wall plate using four lag bolts and washers . Tighten the lag bolts only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt.
-
Page 14: Step 3 Attach Tv To Wall Plate
STEP 3 Attach TV to Wall Plate Hang TV/bracket assembly onto wall plate using predetermined angle (Step 1.1 pages 6-7). HEAVY! You may need assistance with this step. - Page 15 Lower the bottom of the TV and press in place. IMPORTANT: You will hear an audible click when the TV bracket is securely fastened to the wall plate...
- Page 16 Adjustments To remove the TV from the wall plate: Pull down and hold the release straps while swinging the bottom of the TV away from the wall plate, then lift the TV up and off the wall plate. HEAVY! You may need assistance with this step.
- Page 18 MILESTONE LIMITED WARRANTY AND CONNECTED EQUIPMENT WARRANTY Product Warranty Milestone warrants to the original purchaser that the product shall be free of defects in materials and workmanship under normal use for one year. When this surge protector operates properly and prevents an energy surge from damaging electrical equipment, the surge protective com- ponent will disconnect from the circuit and you will need to buy a replacement product.
- Page 19 Registration. Please register your Product at www.milestone.com. Failure to register does not affect your warranty rights. FORMAL WARRANTY CLAIM How To Make A Claim. In the event damage has occurred to a Milestone product or to connected equipment, you must contact Milestone within thirty (30) days of the date you knew or should have known of the damages.
- Page 20 ©2019 Milestone AV Technologies. All rights reserved. Secura is a brand of Milestone. Secura, the Secura logo, and MountFinder are trademarks of Milestone. Milestone AV Technologies • 6436 City West Parkway • Eden Prairie, MN 55344 USA...
Need help?
Do you have a question about the QLTK1 and is the answer not in the manual?
Questions and answers