Machine Controls - Pregis packmaster pro 383 Operating Manual

'On'
Button
Quantity
Knob
'On' Button Press the green 'On' button to switch the machine on.
The display will illuminate.
'Off' Button Press the red 'off' button to stop the machine in a controlled manner and switch
the machine off.
The display will show 5 'dots'.
'Home' Button
Stops the machine producing packs if running more than one, cancels 'A1' or
'A2' semi automatic operation, or restores the last set of values for quantity and
length.
Preset Buttons
The three buttons can be programmed by the operator with commonly used
quantity and length combinations.
Quantity Knob
This is used to select the quantity of packs required from 'A1', 'A2' and 01 to 99
or continuous.
Length Knob
The pack length can be adjusted from 25cm to 999cm long on standard ma-
chines.
'Run' Button
This button is pressed to initiate the cycle for single pack, semi-automatic and
continuous operation.
*Fault Indication*
If the machine stops unexpectedly and F1, F2, F3 or F4 are displayed,
this indicates a fault (see troubleshooting, page 21).
38-OM225-1

Machine Controls

'Off'
Button
'Length'
Knob
www.pregis.com
'Home'
Button
'Run'
Button
Preset
Buttons
6