Advertisement
Quick Links
Safety and Use
•
I f inadequately shielded, some
electronic devices may be affected
by the electromagnetic interference
caused by the modem, such as
the electronic system of vehicles.
Consult the manufacturers of such
devices before using the modem if
necessary.
•
O perating the modem may interfere
with medical instruments such as
hearing aids and pacemakers.
Always keep the modem more
than 20 centimeters away from
such medical instruments when
your modem is turned on. Turn the
modem off if necessary. Consult a
physician or the manufacturers of
medical instruments before using
the modem if necessary.
•
B e aware of the usage limitation
when using the modem at places
such as oil warehouses or chemical
factories, where there are explosive
gases or explosive products being
processed. Turn off the modem if
necessary.
•
D o not use electronic transmission
devices in aircrafts, at petrol
stations or in hospitals. Observe
and obey all warning signs, and
turn off the modem in these
conditions.
•
D o not touch the inner antenna
area unless it is necessary.
Otherwise the performance of the
modern may be affected.
•
K eep the modem out of the reach
Getting to Know Your Modem
The following figure is only for your reference. The actual product may be different.
1. Modem cap
2. Front cover
3. Indicator light
4. USB connector
5. *microSDHC™ card slot
6. micro-SIM card slot
NOTE:
microSDHC logo
is a trademark of SD-3C, LLC.
MF833V
USB Modem
Quick Start Guide
of little children. The modem may
cause an injury if used as a toy.
•
W hen the modem is operating, do
not touch the metallic parts. Failing
to do so may cause burns.
•
U se original accessories or
accessories that are authorized.
Using any unauthorized
accessories may affect the
performance of the modem
and violate the related national
regulations about telecom
terminals.
•
A void using the modem near
or inside metallic structures or
establishments that can emit
electromagnetic waves, because
signal reception may be affected.
•
T he modem is not waterproof.
Keep the modem dry and store it in
a shady and cool place.
•
D o not use the modem immediately
after a sudden temperature
change. In such case, dew may
be generated inside and outside
the modem, so do not use it until it
becomes dry.
•
H andle the modem carefully. Do not
drop, bend or strike it. Otherwise
the modem may be damaged.
•
O nly qualified personnel can
dismantle and repair the modem.
•
A n operating temperature between
-20°C and +55°C and a humidity
between 5% and 95% are
recommended.
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Indicator Light Description
Indicator Status
Red
The device is in error status or booting up.
•
T he device is not registered to the mobile network.
•
T here is no micro-SIM card inserted.
•
T here is no network service available.
Green solid
The device is registered to the 2G/3G mobile network.
Green blinking
The device is connected to the 2G/3G mobile network and
data is being transferred.
Blue solid
The device is registered to the 4G network.
Blue blinking
The device is connected to the 4G network and data is being
transferred.
Using Your Modem
1. Insert the micro-SIM card into your modem.
Step
Step
NOTES:
•
D o not open the front cover forcibly. Failing to do so may cause damage to the
front cover.
•
* If the modem supports the microSHDC card, you can insert your microSDHC
card at the same time.
WARNING!
Your modem only supports the micro-SIM card. You can get a standard micro-SIM
card from your service provider.
2. Connect the modem to your computer or laptop.
3. The software will be installed automatically and then you can use your modem.
NOTE:
If the system does not launch installation automatically, you can double-click the
modem installation icon in My Computer > ZTEMODEM to install the software.
Setting Your Modem
You can set your modem by:
•
C licking Settings on the software (For PCUI).
•
L ogging in to the 4G Hostless Modem configuration page by visiting
http://192.168.0.1 (For WebUI).
Description
Step
Step
Advertisement
Related Manuals for Zte MF833V
Summary of Contents for Zte MF833V
- Page 1 MF833V USB Modem Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.China Safety and Use Indicator Light Description • I f inadequately shielded, some of little children. The modem may Indicator Status Description electronic devices may be affected cause an injury if used as a toy. The device is in error status or booting up. by the electromagnetic interference • W hen the modem is operating, do • T he device is not registered to the mobile network. caused by the modem, such as not touch the metallic parts. Failing • T here is no micro-SIM card inserted. the electronic system of vehicles. to do so may cause burns. • T here is no network service available. Consult the manufacturers of such •...
- Page 2 The exposure standard for wireless employs a unit of measurement known as the For this product’s recycling information based on WEEE directive, please send an Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. e-mail to weee@zte.com.cn Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency EU DECLARATION OF CONFORMITY bands. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on Hereby, ZTE Corporation declares that the radio equipment type ZTE MF833V is in FCC ID: SRQ-MF833V. compliance with Directive 2014/53/EU. For this device, the highest reported SAR value for near the body is 1.11 W/kg. The full text of the EU declaration of conformity is available at the following Internet While there may be differences between the SAR levels of various devices and at address: https://certification.ztedevices.com various positions, they all meet the government requirement. SAR compliance for body operation is based on a separation distance of 5 mm Declaration of RoHS Compliance between the unit and the human body. Carry this device, at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. We declare that ZTE MF833V manufactured by ZTE CORPORATION meets the To support body operation, choose the belt clips or holsters, which do not contain requirements of RoHS Directive 2011/65/EU and its amended directive (EU)2015/863. metallic components, to maintain a separation of 5 mm between this and your body. More information,please refer to https://certification.ztedevices.com.
Need help?
Do you have a question about the MF833V and is the answer not in the manual?
Questions and answers