Cleaning And Storage; User Servicing Instructions - Pelonis PFT28A2BWW User Manual

CLEANING AND STORAGE

• Ensure the fan is turned off and unplugged.
• Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
• To clean between the grills and fan blade area, we recommend using a
pipe cleaner, flexible dust wand, vacuum cleaner or compressed air to
gently remove the dust.
• To clean the rear grill use a soft dry cloth.
• DO NOT immerse the fan in water and never allow water to drip into the
motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, you may leave the fan assembled and covered to protect it
from dust. Store the fan in a cool, dry place.

USER SERVICING INSTRUCTIONS

1. Grasp plug and remove from the
receptacle or other outlet device. Do not
unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access
cover on top of attachment plug towards
blades.
3. Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the
terminal), then pry the fuse gradually and slowly, but not overexert. If you
feel tight, you can try it at several times and pry the fuse little by little. When
one side of the fuse has been pryzed, then you can get the fuse out entirely.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6. To Reduce the Risk of fire, do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the attached
plug is damaged.
NOTICE
When you replace the fuse, please don't operate suddenly or overexert,
or else the product will be damage or cause accident.
 Page 6 