Table of Contents
Advertisement
Note: Pressing the Therapy Off button (
communication in progress. The sleep remote then attempts
to turn your generator off.
Pausing Therapy
If you wake with your therapy on, and you intend to go back
to sleep, you can pause therapy instead of turning therapy
off. The length of time that the therapy pauses is set by your
doctor.
Therapy Pause and Start Delay are different. Start Delay
begins automatically when you turn therapy on. When
therapy is on, Therapy Pause begins when you press the
Therapy On button (
To pause therapy:
1. Press the Therapy On button (
2. Position the sleep remote directly over your generator
and against your body with the buttons facing away from
your body (Figure 15).
3. Wait until the sleep remote produces a tone or 10
seconds pass.
4. Check the status ring.
– If the status ring is slowly dimming and brightening
green, therapy is paused. The status ring stays lit for
several seconds after communication with the
generator.
– If the sleep remote lights are off, gently shake the
remote and the lights will turn on.
).
Inspire Sleep Remote
) cancels
).
English 27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SLEEP REMOTE and is the answer not in the manual?
Questions and answers
In the battery compartment there is what appears to be a charging port. How can this be used? Can charging it take the place of batteries or charge batteries? Mine is a Model 2500 Inspire
The charging port in the battery compartment of the Inspire Model 2500 Sleep Remote should not be used to connect anything. It does not replace or charge batteries. The remote uses two AAA or LR03 alkaline batteries, which must be replaced when needed. Rechargeable batteries should not be used.
This answer is automatically generated
The remote will turn on pause and stop but not activate
The Inspire Sleep Remote may not activate due to the following reasons:
1. Therapy is Off – The device may not have been turned on. Check the sleep remote’s status ring; if it is white, therapy is off. Turn therapy on again.
2. Electronic Interference – Other electronic devices may be interfering with communication between the sleep remote and the generator. Move away from other electronic devices and try again.
3. Delayed or Paused Stimulation – If the status ring is slowly dimming and brightening green, therapy is on but stimulation is paused. Stimulation will start automatically after the Start Delay or pause time.
4. Low Stimulation Strength – If the status ring is solid green but no stimulation is felt, the stimulation strength might be set too low. You may need to increase the stimulation strength.
If these steps do not resolve the issue, further troubleshooting may be needed.
This answer is automatically generated
Can I turn inspire on/off with iPhone?
The provided context does not mention using an iPhone to turn the Inspire Sleep Remote on or off. It states that if your remote does not pair with your phone via Bluetooth or if you do not track your sleep with the Inspire app, you will need to bring your remote to your doctor's appointment. However, it does not confirm whether an iPhone can be used to turn the device on or off.
This answer is automatically generated