SD card reader - optional
Removing the SD card reader
Prerequisites
1. Follow the procedure in
2. Remove the
Side cover
3. Remove the
Front bezel
4. Remove the
Hard drive assembly
5. Remove the
Optical drive assembly
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
Steps
1. Unroute the power supply cables from the retention clip on the SD card reader.
2. Remove the two screws (M6X32) and lift the SD card reader from the chassis.
Installing the SD card reader
Prerequisites
About this task
The following image indicates the location of the SD card reader and provides a visual representation of the installation
procedure.
30
Disassembly and reassembly
Before working inside your
computer.