Related Manuals for Electrolux EFCR 143
Summary of Contents for Electrolux EFCR 143
- Page 1 All manuals and user guides at all-guides.com Instruktionsbok, Bruksanvisning, Brugsvejledning EFCR 143 EFC 1436 Käyttöohje, User Manual, Gebrauchsanweisung...
-
Page 2: Information About Safety
All manuals and user guides at all-guides.com Contents Information about safety The hood is destined uniquely for non-professional use in a domestic setting. It complies with international safety quality regulations and requisites. The safety measures cannot, however, eliminate all risks of accidents. Read the instructions, suggestions, and warnings carefully before installing and starting to use the hood. - Page 3 All manuals and user guides at all-guides.com For the installer For the user...
- Page 4 The following accessories are supplied together with the hood: • 1 cover complete with commands, illumination and ventilator motor (the EFCR 143 model is without a motor and must be connected to an external system of aspiration); • 1 screen;...
-
Page 5: How To Use The Hood
All manuals and user guides at all-guides.com How to use the hood B C D E Fig. 3 Activate the LED as indicated below if the hood Control Panel has to be used with the carbon filter: Press keys B and G simultaneously for three seconds. -
Page 6: Maintenance And Cleaning
Active carbon filter An active carbon filter must be used only if the hood is used in the recirculating version (filtering). An original ELECTROLUX active carbon filter must be used (it can be ordered from your ELECTROLUX assistance service). This kind of filter cannot be cleaned or regenerated. - Page 7 All manuals and user guides at all-guides.com Changing the lamp The hood must be disconnected from the power supply when changing the lamp. Carry out the change in this way - Fig. 5: · Remove the protective glass of the lamp with a screwdriver.
-
Page 8: Technical Data
All manuals and user guides at all-guides.com Technical data Depth ** External motor (external installation) 942 121 135 External motor (external installation) 942 121 182 Installation Opening the packaging Warning! Check that the aspiration hood is not damaged. Damage due to transportation must be 65 cm 50 cm immediately communicated to the transport... - Page 9 All manuals and user guides at all-guides.com Installation Mounting the hood Adjust the height of the structure of the telescopic support previously: · Fix the two sections of the telescopic support structure with a total of 8 “a” screws (Fig. 8). Calculate the height of the 290 mm hood and the minimum distance from the cooking top (see fig.
- Page 10 All manuals and user guides at all-guides.com Make sure that the plug is disconnected during the montage operations. · Join the upper and lower sections of the flue provisionally with an “a” screw (Fig. 11). · Fix the upper section of the flue onto support structure “b”...
- Page 11 All manuals and user guides at all-guides.com Connection to external motor External motor (for external installation) 942 121 135 Valid only for the EFCR 143 model. External motor (for external installation) The hood is not equipped with an internal motor 942 121 182 and must be connected to an external motor (to purchase separately).
- Page 12 The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.