Sealey AK4404 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this
‰
equipment.
Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the grease gun clean for best and safest performance.
9
Check moving parts alignment on a regular basis.
9
DO NOT use the grease gun for any purpose other than that it was designed for.
8
DO NOT operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.
8
When not in use store in a safe, dry, childproof location.
9
WARNING! Always wear approved eye protection when operating the grease gun.
‰
2. INTRODUCTION
Highly durable die-cast aluminium alloy pump head with air-bleed valve. Fitted with an innovative quick release mechanism to speed
up the re-fill process. Features three-way fill with cartridge, bulk and manual capability. Supplied with a rigid delivery tube, push-on
hydraulic 4-jaw coupling and contoured rubber pump handle. Accepts standard 400g cartridges.
3. SPECIFICATION
Model No: ................................................................ AK4404
Capacity: .................................................................... 400cm
Delivery per stroke: ................................................... 0.71cm
Delivery pressure: ......................................................7000psi
Optional accessories:
GGHE300 - Rubber Delivery Hose with 4-Jaw Connector Flexible 300mm 1/8" BSP Gas
4. OPERATION
fig.1
© Jack Sealey Limited
QUICK RELEASE THREE-WAY FILL SIDE
LEVER GREASE GUN
MODEL NO:
Wear protective
gloves
Air vent valve A
Quick release
assembly
Plunger Handle
Original Language Version
AK4404
3
3
Air vent valve B
Filler plug
fig.2
Air vent valve A
AK4404 Issue 1 21/04/20