Ordering Information: Retractable Mount Hesi Igniter - Fireye SureFire HESI Instruction Manual

ORDERING INFORMATION: RETRACTABLE MOUNT HESI IGNITER

RETRACTABLE HESI IGNITER SPECIFICATION STEPS (Refer to figure 3)
1.
2.
3.
4.
5.
1.
2.
3.
The spark rod part number will start with "SF1", followed by three digits. These three digits specify
the rod length (in inches) available in two inch increments from 14" ("014") to 180" ("180").
14
Select the appropriate HESI Power Pack (P/N SF1-X).
Select the appropriate HESI Interconnecting Cable (P/N SF1-CA1-XX).
Select the appropriate HESI Rod, (P/N SFR-XXX), taking note of the minimum external
(retracted) length shown on Figure 3.
Select the appropriate Retractor Assembly (P/N SF1-RET-X).
Select the appropriate optional retraction mounting tube (P/N MT1R-XXX).
SELECT THE APPROPRIATE HESI POWER PACK
PART NUMBER
SF1-1 SureFire HESI Power Pack, 110 vac, NEMA 4 (painted steel)
SF1-2 SureFire HESI Power Pack, 220 vac, NEMA 4 (painted steel)
SF1-3
SureFire HESI Power Pack, 110 vac, NEMA 4X (stainless steel)
SF1-4 SureFire HESI Power Pack, 220 vac, NEMA 4X (stainless steel)
SELECT THE APPROPRIATE HESI INTERCONNECTING CABLE
PART NUMBER
SF1-CA1-06 SureFire HESI interconnecting cable with connectors, 6 feet long
SF1-CA1-09 SureFire HESI interconnecting cable with connectors, 9 feet long
SF1-CA1-12 SureFire HESI interconnecting cable with connectors, 12 feet long
SF1-CA1-15 SureFire HESI interconnecting cable with connectors, 15 feet long
SELECT THE APPROPRIATE SUREFIRE HESI SPARK ROD
SFR –XXX
High Energy Spark Igniter
Spark Rod
EXAMPLE: Specify a SureFire HESI Spark Rod - 72 inches
long. Specify part number: SFR – 072
DESCRIPTION
DESCRIPTION
Length in inches
(014 through 180)
in 2" increments
© 2020 Carrier