Switcher Link - Panasonic AK-HRP1015G Operating Manual

28 SWITCHER LINK

Item
SW'IP Sets the IP address of the switcher.
RECEIVE UDP PORT Sets the port number of the unit that will receive communications from the switcher.
UPLOAD When you press the menu operation dial, the configured IP address and port number will be applied to the
unit.
SWITCHER LINK Enables the link with the switcher when set to "ON".
TALLY RECEIVE Enables reception of tally notifications when set to "ON".
PREVIEW Sends notification of [PREVIEW] button operations to the switcher when set to "ON".
TALLY ACTION Selects the material.
MATERIAL
TALLY ACTION CAM Sets the camera number to which the tally notification will be sent for notifications of the material information
No. configured in [TALLY ACTION MATERIAL].
Be aware that if multiple instances of [TALLY ACTION MATERIAL] are assigned to the same camera
number, the tally indication will blink due to the existence of lit and unlit material.
Tally control will be performed for the camera that is connected to the unit at that moment.
Tally control will not be performed for cameras that are not connected.
ROP Menu (during AW-UE150 connection)
Setting details
- 43 -