Greasing; About Greasing; Greasing Points - Baroness LM3210A Owner's Operating Manual

Greasing

About Greasing

Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.

Greasing Points

Type_F
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
3
4
10
7
2
7
10
5
1

Greasing

6
1
9
8
ysd2y4-018
Type_F_001
Maintenance
Location
1 Mower arm fulcrum
2 Lift arm fulcrum
3 Brake lever shaft
4 Traveling pedal shaft fulcrum
5 Pivot
6 Neutral position area
7 Reel housing
8 Rear roller
9 Front roller
10 Mower unit fulcrum
1. Mower arm fulcrum
There is one greasing point on each mower
arm fulcrum connected to a mower unit.
Grease mower units #2 and #3 in the
swiveled position.
"Swiveling Mower Units #2 and #3" (Page
5-35)
Mower units #1, #4 and #5
Type_F_002
Mower units #2 and #3
Type_F_003
LM3210A
No. of
greasing
points
5
5
2
2
3
2
10
10
10
5
ysd2y4-005
ysd2y4-006
Page 5-21