Advertisement
Quick Links
Advertisement
Related Manuals for SkyVac Industrial 85
Summary of Contents for SkyVac Industrial 85
- Page 1 Assembly Guide Industrial 85...
-
Page 2: Congratulations On Your Purchase
Capable of accessing gutters up to 12m / 40 feet / 4 stories in height, the skyVac Industrial 85, comes with a lightweight, carbon fibre pole system, along with an array of tools, to tackle the contents and shape, of every gutter challenge. - Page 3 Elite Drum with Darin Hose & Sieve Basket...
- Page 4 Elite Hairpin Neck Tool Holder : UK Design...
- Page 5 POWERMIX LEVER For the RIGHT suction power for each job – at the flick of a switch. Our unique, patented “Power Mix” system, reconfigures the power supply, from parallel to series, to deliver an unprecedented 150 Inch Water lift, on the HEAVY DEBRIS setting, which is +50% higher than the standard 3 motor, wet and dry machines.
- Page 6 POLE / TOOL ASSEMBLY INSTRUCTIONS STEP 1: Insert your chosen Elite End Tool, into the clamped end of the Elite Hairpin Neck Tool and close the clamp. STEP 2: Open the clamp on the top of the Elite pole and insert the Elite, Hairpin Neck Tool.
- Page 7 POLE / TOOL ASSEMBLY INSTRUCTIONS STEP 4: Build poles up to your desired height, by slotting in each pole, up to the positive stop. We recommend resting the poles against the side of the building you will be cleaning, to achieve the required height. Open clamp and insert pole, up to the positive stop marking and no further.
- Page 8 ASSEMBLY INSTRUCTIONS STEP 6: Screw the Soft Cuff onto the end of the Flexi Hose, then onto the bottom of the Elite Suction Pole. STEP 7: Insert the Hard Flexi Hose Cuff, into the Vacuum Port - you will hear a click, once it is secured.
-
Page 9: How To Use
POLE / TOOL ASSEMBLY INSTRUCTIONS VAC RELEASE POLE: Control suction with a simple twist of the cuff, with the Vac Release Pole. This innovative and ultra -lightweight carbon fibre pole, enables the operator to safely and efficiently release gutter debris, without having to lower poles, or cut vacuum power. -
Page 10: Drain Hose
EMPTYING YOUR MACHINE The skyVac Industrial now features a Drain Hose and Sieve Basket, a more flexible and ® user friendly approach, to gutter waste disposal. These additions separate the gutter contents into liquid and organic matter. DRAIN HOSE STEP 1:... - Page 11 EMPTYING YOUR MACHINE STEP 3: LOCKING FRONT CASTORS Before emptying your skyVac, or re- move the drum from the chassis, press down on the steel lever, on the back of each wheel with your foot, to secure the machine firmly in place.
- Page 12 STEP 6: Fine silt and sediment will collect in the base of the drum, so it is essential to empty your drum, at the end of each project. Once the machine is secured in place, using the handle at the base of the drum, lift and tilt for- wards.
- Page 13 BEST PRACTICE: FILTER DRY / DUSTY DEBRIS: Filter must be used. Ensure that a clean filter is secured in place, before each project. SLUDGE / LIQUIDS The filter can be extracted, to remove sludge and liquids. TO REMOVE FILTER To remove the filter, rotate the black end filter, to unlock the protective cap. MAINTAINENCE: FILTER When the pleats of the filter become clogged with dirt, it prevents air from...
- Page 14 MAINTAINENCE: FILTER The basket area behind the fil- ter, can also get coated in dirt and prevent the system from breathing. To clean the basket, disconnect it, by twisting it slightly to the left and pulling it out. Remember to remove the white float valve, before cleaning.
- Page 15 MAINTAINENCE : POLES During cleaning, wet or damp gutter debris, can sometimes stick to the inside of your poles, and the weight of the poles will increase slightly. To remedy this, place the end tool in water and suck up a small amount of water. After every job, clean the inside of the poles and flexi hoses, by sucking half a bucket of water up into the vacuum...
Need help?
Do you have a question about the Industrial 85 and is the answer not in the manual?
Questions and answers