Connect Power Cable; Power On Device - Lenovo ThinkSmart Hub Deployment Manual

ThinkSmart Hub Hardware Deployment Guide for all UC Platforms

Connect Power Cable

9. Take the yellow end of power cable and insert into bottom right port.
Mount One Cable Inside Security Box
10. When all 4 blocks are connected, the drop into the security box. Then connect your
accessories and displays, securing with zip tie (not included). Add box top and security screw. The
box can then be mounted under a table, on a wall or behind a display

Power On Device

11. Power on the ThinkSmart Hub by pressing the button on edge of device.
12