NEXTIVITY CEL-FI COMPASS Quick Start Manual page 2

Quick Installation
Connect the Whip Antenna
Connect the Whip Anten-
na to the MAIN port on
the top of the unit.
MAIN
Insert SIM Card
Insert an active SIM
card in the slot at the
bottom of the unit.
Download and Install Cel-Fi WAVE
PRO App
Download and install the app Cel-Fi WAVE
PRO available on both smartphones and
tablets from the following app stores.
CAUTION: Rotate the
antenna only from the
base clockwise. Ensure the
connector is finger tight.
GOOD
MIMO
SIM Card
<
Download Software
Type SKU
NU
CU
?
NOT
GOOD
Customers who want to setup their Cel-Fi QUATRA
1000 or 2000 to run in an offline mode can use this
tool to activate, configure basic settings and update
590NQ34TTN02TNN07BL4
the system software.
590NQ34TTN02TNN07BL4
Check for Updates For customers with the Cel-Fi Antenna Mount, the
Antenna Pointing feature will find the best direction
The software is ready to install. Connect the
Compass to your Cel-Fi QUATRA.
to aim donor antennas. Cellular coverage reports
and speed tests can be run on-site to help optimize Cel-Fi systems.
Connect Cel-Fi COMPASS
and Cel-Fi WAVE PRO
Make sure Cel-Fi COMPASS is powered
on and the "Status" light is solid green.
a) Enable Bluetooth in your phone and
launch Cel-Fi WAVE PRO.
b) If a device is found, the app will
automatically connect to it and pro-
ceed. If multiple devices are found,
then a list is displayed and you can
select which device to connect to.
c) Enter a name for your device, If you
skip this option the serial number will
be the name of your device.
Cel-Fi COMPASS & Cel-Fi WAVE PRO
are now linked and ready to operate
The Cel-Fi COMPASS and Cel-Fi WAVE
PRO work together to improve cellular
coverage installations.
Select Your Compass
935731000077
986214189003
922541000085
940123882101
Search Again
MegaTel
935731000077
Installation
Software Update Band Settings
offline update relay bands
Antenna Settings
internal/external
Optimization
Antenna Positioning Full Signal Report