1265 (RH-103)
Antenna Description and Troubleshooting
Grounding of Display Frame
The display frame is grounded to the PWB through 2 ground panels. The display
frame grounding needs to touch the PWB. If not, the radio performance will be
impacted.
If the clips/tabs do not touch the ground of the PWB, or are corroded, or
are obstructed, replace the LCD Module Shielding Assembly.
Display frame grounding through
Display frame grounding through screw
Display frame grounding tabs
Display frame grounding tabs
Page 6
© 2007 Nokia Corporation
Figure 5: Display assembly ground points
screw
Company Confidential
Issue 04/2007