Self-Clean Function - Motorola Air Conditioners Instruction Manual

OPERATING INSTRUCTIONS
MILDEW function (Optional)
MILDEW
Press OPTION at the first time , select the MILDEW by
pressing the button or until symbol MILDEW
is flashing; Press OPTION again to activate the
MILDEW function, and
Do it again to deactivate this function.
This function enable the air conditioner still blow
airflow about 15 minutes to dry the indoor inner parts
to avoid mildew, when the air conditioner is off.
Note: MILDEW function only available in DRY/COOLING mode

SELF-CLEAN function

CLEAN
Switch off the air conditioner by pressing
Press OPTION at the first time , select the CLEAN by pressing the
button or until symbol CLEAN is flashing; Press OPTION again
to activate the CLEAN function, and
Do it again to deactivate this function.
1. This function help carry away the accumulated
dirt, bacteria, etc from the evaporator.
2. This function will run about 30 minutes, and it will return to the
pre-setting mode .You can press
the process. You will hear 2 beeps when it's finished or cancelled.
3. It's normal if there are some noise during this function process,
as plastic materials expand with heat and contract with cold.
4. We suggest operate this function as the following ambient
condition to avoid certain safety protection features.
Indoor unit
Outdoor unit
5. We suggest operate this function per 3 months.
8 heating function (Optional)
It can be set in Cool/Heat/Dry/Fan/Auto mode,
8 H
but you need to turn off the unit to activate it.
1.Press OPTION at the first time , select the 8
pressing the button or until symbol 8
is flashing; Press OPTION again to choose the
8 heating function, and
Do it again or change the mode to deactivate this function.
2.If the air conditioner is standby, this function enable the
air conditioner automatically start heating when the
indoor temperature is equal or lower than 8 , it will return
standby if the temperature is equal or higher than 18 .
appears on the display.
MILDEW
(Optional)
CLEAN
to cancel this function during
Temp<30
5 <Temp<30
H
appears on the display.
8 H
appears on the display.
H by
16