HSC ELITE HEAT Instruction Manual

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELITE HEAT and is the answer not in the manual?

Questions and answers

Summary of Contents for HSC ELITE HEAT

  • Page 2 Thank you for purchasing the Elite Heat 1500w portable heater. The ELITE HEAT 1500w portable heater uses a single gold quartz heating element (Product Code: EH1400ELEMENT240 / EH1400ELEMENT110) and is waterproof to IP65. SPECIFICATION VOLTAGE AC 240V 50-60Hz AC 110V 50-60Hz...
  • Page 3 ELECTRICAL SAFETY 240V Model: The 240V model is fitted with a 13a, 3 pin plug and can be powered from a standard 240V 23a power supply. 110V Model: The 110V 16a plug will require a 110V power supply, this should be taken from a suitable generator or from a suitably rated power transformer.
  • Page 4 Maintenance should always be carried out by suitably competent persons. If in doubt, contact your supplier. OPERATION The ON/OFF switch is located on the front of the heater at the top. To turn the heater ON, move the switch to the “I” position. The element should switch on and glow red.
  • Page 5 STORAGE Before storing the heater, allow it to fully cool. Neatly coil the power supply cable and set the switch to OFF. Store in a dry location, preferably in its original packaging. REPAIRS AND MAINTENANCE REPAIRS AND MAINTENANCE OF THE HEATER MUST ONLY BE PERFORMED BY A COMPETENT SERVICE TECHNICIAN.

This manual is also suitable for:

Eh1400element240Eh1400element110

Table of Contents