Advertisement
Quick Links
ARB WINCH BULL BAR TO SUIT
HOLDEN JACKAROO STD, SE & MONTEREY 1998-2001
HOLDEN JACKAROO STD 2001 ON
ARB WINCH BULL BAR TO SUIT
HOLDEN JACKAROO WIDE BODY SE & MONTEREY 2001 ON
WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT
PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE
HARDWARE SUPPLIED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED
BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
• THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.
27/10/05
WARNING
FOR VEHICLES EQUIPPED WITH SRS AIRBAG
Page 1 of 4
No 3444060
No 3444070
3782586
Advertisement
Related Manuals for ARB 3444070
Summary of Contents for ARB 3444070
- Page 1 ARB WINCH BULL BAR TO SUIT HOLDEN JACKAROO STD, SE & MONTEREY 1998-2001 HOLDEN JACKAROO STD 2001 ON No 3444060 ARB WINCH BULL BAR TO SUIT HOLDEN JACKAROO WIDE BODY SE & MONTEREY 2001 ON No 3444070 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.
- Page 2 M6 FLANGE NUT 4581035 M6 X 16OD FLAT WASHER WINCH TO BAR 4581040 M10 FLAT WASHER 3500080 ARB INDICATOR KIT 180302 CABLE TIES 3500200 BUFFER KIT TOOLS REQUIRED Basic tool kit, drill, 10mm and 12mm drill bits. FITTING THE 9,000lb WINCH 1.
- Page 3 7. Fit the winch and roller fairlead into the bull bar using bolts from the winch kit and four M10 washers from the ARB bolt kit. 8. Connect the winch control box cables to the winch motor. Refer to the Warn handbook for additional information.
- Page 4 FITTING THE BULL BAR TO THE VEHICLE 10. Remove the bumper from the vehicle. Fit the chassis brackets (Part No. 3751747 L&R) to both sides of the vehicle using two M10 x 25mm bolts and four M12 x 40mm bolts, crescent moon washers, offset washers, flat washers, spring washers and nuts. (Refer to diagram 4.) Fit two 6mm spacers between inside of chassis bracket and on outside of vehicle chassis rail and align with 12mm captive nut and secure using 12mm hardware.
Need help?
Do you have a question about the 3444070 and is the answer not in the manual?
Questions and answers