Table of Contents
Advertisement
USER MANUAL
TF-D2450 TREADMILL
Please Keep For Future Reference
F4H-TM-D2450
IMPORTANT - Please Read Instructions Fully Before Assembly Or Use
These instructions contain important information which will help you get the best
from your equipment and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts,
call the Customer Helpline: 0330 124 0718 (Opening hours: Mon-Fri 9:00am-3:00pm)
or Email: customerservices@fit4home.co.uk
1
Advertisement
Table of Contents
Related Manuals for Fit4Home TF-D2450
Summary of Contents for Fit4Home TF-D2450
- Page 1 USER MANUAL TF-D2450 TREADMILL Please Keep For Future Reference F4H-TM-D2450 IMPORTANT - Please Read Instructions Fully Before Assembly Or Use These instructions contain important information which will help you get the best from your equipment and ensure safe and correct assembly, use and maintenance.
-
Page 2: Table Of Contents
CONTENTS Safety Information 03-04 Assembly Instructions Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Folding Instructions Technical Parameter Computer Operation Guide 10-13 Exercise Instructions 14-15 Warm Up Running Belt Adjustment 17-18 Exploded Drawing Parts List 20-21 Troubleshooting Declaration... -
Page 3: Safety Information
IMPORTANT SAFETY INFORMATION Warning: We suggest that you should consult with your physician or health professional before starting your workout, especially for the age up to 35 old or health problem related people. We take no responsible for any troubles or hurts if you don’t following our specification. - Page 4 IMPORTANT SAFETY INFORMATION When you open the carton, and you will find the below parts in the carton DES. Specification Qty. DES. Specification Qty. Main #5 Allen frame wrench Bolt M8*45 Bolt M8*16 Left Right base base cover cover Oil bot- Lock washer Safety...
-
Page 5: Assembly Instructions
ASSEMBLY INSTRUCTIONS STEP 1 Open the carton, get out the above spare parts, and put the Main Frame onto the level ground. STEP 2 Notice: Do not press the computer wire when folding the computer. 1. Put the computer as below illustration, screw off Bolt M8*16 (51) and the Lock washer (64) of Left... -
Page 6: Step 3
ASSEMBLY INSTRUCTIONS STEP 3 Pull up the Computer and L& R upright as the arrow position. Notice: When you pull up them, make sure the upright not press the wires in upright; keep touch the upright and computer by hand, that they will not fall down escaping any hurt. -
Page 7: Step 5
ASSEMBLY INSTRUCTIONS STEP 5 Use wrench w/screw driver, lock the Right base cover (84) and ST4.2*19 Bolt(60) to the right upright and base. Left side assembly method same as right side. STEP 6 Put the safety key (71) on the computer. -
Page 8: Folding Instructions
FOLDING INSTRUCTIONS PULLING UP 1. Pull up the base frame at position( A) till hearing the sound that the air pressure bar (B) is locked into the round tube. PULLING DOWN 1. Support place A with hand , kick the place of air pressure bar, then the base frame will fall down automatically (Please keep anybody and any pet away the machine... -
Page 9: Technical Parameter
TECHNICAL PARAMETER BUILT UP SIZE (mm) 1620*700*1339mm POWER As the rating label showing FOLDED SIZE (mm) 900*700*1445mm MAXIMUM As the rating OUTPUT label showing POWER RUNNING AREA (mm) 450*1250mm SPEED RANGE 1.0-16KM/H NET WEIGHT 56.5KG MAX USER 100KG WEIGHT 1 LCD WINDOW DISPLAY SPEED, TIME, DISTANCE, PULSE, CALORIES GROUNDING METHODS This product must be grounded. -
Page 10: Computer Operation Guide
COMPUTER OPERATION GUIDE 1. LCD WINDOW DISPLAY SPEED: Show speed and program; When start the machine, speed arrangement is 1.0-16.0KM/h. The window will count down:3,2,1,when it goes program. It shows P01-P15----U01-U03 –FAT. TIME: Show running time; DIST.: Show distance; CAL.: Show calories; PUL.: Show heart beat data;... - Page 11 COMPUTER OPERATION GUIDE 3. MAIN FUNCTION Open the power switch, the window will light, the machine will enter into ready state. 3.1 START-UP QUICKLY (MANUAL): A.Attached to the panel on the safety lock safety lock switch position B. Press START,the window display:3-2-1 and the buzzer beeps,then start the motor. 3.2 COUNT DOWN MODE: Press the ‘...
- Page 12 COMPUTER OPERATION GUIDE 4. INNER PROGRAMME DATA LIST TIME To set time / 20 time = running time of each period 13 14 15 16 17 18 19 20 PROG SPEED INCLINE 1 SPEED INCLINE 1 SPEED INCLINE 2 SPEED INCLINE 2 SPEED INCLINE 3...
- Page 13 COMPUTER OPERATION GUIDE 5. USER DEFINED PROGRAMME There are 3 programs U1, U2, U3 for user defined. 7.1. Setting Press program key to select any U1-U3 for self setting program.Then press MODE key enter to self condition, the speed& incline window show the value of the segment. By plus or minus to adjust the speed and incline paragraph.
- Page 14 COMPUTER OPERATION GUIDE 7. DATA DISPLAY AND SET RANGE INITIAL DATA DEFAULT DATA SETTING SHOWING Time (min;sec.) 0:00 15:00 5:00-99:00 0:00-99:59 Incline (piece) 0-15 Speed (km/h) 1.0-16 Distance (km) 1.00 0.5-99.9 0.00-99.9 Pulse (piece/min) 50-200 Calories (Kilocalories) 50.0 10.0-999 0 999 8.
-
Page 15: Exercise Instructions
EXERCISE INSTRUCTIONS WARM UP STAGE If you are over 35 years old, or not very healthy, also it’s your first time exercise, please consult with your doctor or professional person. Before you use the motorized treadmill, please learn how to control the machine, know well how to start, stop, adjust the speed and so on, don’t stand on the machine at this time. - Page 16 EXERCISE INSTRUCTIONS EXERCISE FREQUENCY The cycle time: 3-5times/Week, 15-60mints/Times.Make up the schedule of workout scientific, not only for your hobby. You can control the running intensity through adjusting the velocity and incline of treadmill. We suggest that you don’t set the incline at first; improve the incline is the effective way to strengthen the exercise’s intensity.
-
Page 17: Warm Up
WARM UP STAGE EXERCISE FREQUENCY Before exercise, it is better to do stretching exercises . Warm muscles stretch more easily, so the first of 5 ~ 10 minutes to warm up. Then in accordance with the following methods to stop and do stretching exercises - do five times, each leg every time 10 seconds or more time to do it again after the end of the exercise. -
Page 18: Running Belt Adjustment
RUNNING BELT ADJUSTMENT RUNNING BELT ADJUSTMENT Warning: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR SERVICING THE UNIT. Clean: General cleaning or the unit will greatly prolong the treadmill. Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails. - Page 19 RUNNING BELT ADJUSTMENT CENTRE THE RUNNING BELT PIC A Place treadmill on a level surface. Run Treadmill at approximately 6-8KM/H, checking the running condition. If the belt has drifted to the right, pull out of the save clock and switch, turn the right adjusting bolt 1/4 turn clockwise, then start running until centering the belt.
-
Page 20: Exploded Drawing
EXPLODED DRAWING... -
Page 21: Parts List
PARTS LIST DESCRIPTION SPEC. DESCRIPTION SPEC. Main Frame Bolt M8*25 Base Frame Lock nut Upright bracket Screw ST4.2*45 Incline frame Screw ST2.9*6.5 Motor Bracket Bolt M6*65 Computer Bracket Bolt M8*16 Ruebber pad Nylon isolating Turning casing Bolt M8*40 Front Roller Bolt M10*60 Back Roller... - Page 22 PARTS LIST Ring wire plug B Lock Nut Transport Wheel Lock washer Moving wheel Tapered cushion cover Power Wire Bolt M10*20 Switch Flat washer Foam Tube Screw ST4.2*13 Hand pulse with speed Computer up cover Elastic cushion Handle bar decora- Bolt M8*42 tive ring...
-
Page 23: Troubleshooting
TROUBLESHOOTING CODE REASON SOLUTION Message failure between Check the computer and bottom control board computer and control wire connect well; board Check if IC on control board is loosen, reset the IC Power on bottom control board has some problem, change the bottom control board Control board have not 1.Check if the DC motor wire connect well with con- find out the voltage on DC... -
Page 24: Declaration
Declaration of Conformity We, Importer Fit4home Ltd Unit A, Perseverance Mills, Olive Lane, Darwen BB3 3DQ United Kingdom Declare that the product AGILEXL K245A Treadmill Complies with the essential health and safety requirements of the following directive: EN 60335-1:2012 + A11:2014 +A13:2017...
Need help?
Do you have a question about the TF-D2450 and is the answer not in the manual?
Questions and answers
It's switched on but says OFF