Single Camera - Bosch DVR1A1081 Installation Instructions Manual

EazeoRecorderInstalA.book Page 11 Tuesday, November 23, 2004 3:47 PM
DVR1A1081 | Installation Manual | Chapter 2

2.4.3 Single camera

The drawing below shows how to connect a single to
the DVR.
• Connect the monitor to the BNC socket marked
Video Out on the rear of the DVR.
Power switch
Power
AC 100-240
100-240 Vac
Bosch Security Systems | 2004-11
Mux main Video
Monitor In In
Off
Monitor Out Out 1
Monitor
• Connect the video output of the camera to the BNC
socket marked Video In on the rear of the DVR.
• In the system menu set the multiplexer item to Off.
Camera
IR remote
control eye
RS-232
connector
connector
RS 232 Remote Control
Looping out
Out 2
GND VEXT
EN | 11