Wire, Sub-Lead(2Ks-82509-70) - Yamaha GYTR YZF-R1 Manual

4. WIRE, SUB-LEAD(2KS-82509-70)
Parts List
No. PART No.
21 2KS-82509-70
This wire harness is for mounting the KIT
harness to a vehicle with the Electric racing
suspension (ERS) function.
TIP
If the E-SD (STD steering damper) is not
used, removing its coupler will pose no
problem.
NOTICE
•
Before using the KIT ECU for the first
time, use YMS to perform writing of
the base map.
•
Remove the coupler of the main switch
before starting assembling work.
NOTICE
•
Do not remove the AC generator but
leave it to function. Use on the battery
alone will make the machine unable to
run in a short time.
•
Be sure to connect the Hydraulic unit
assy. to the wire harness. The ABS
does not function when using the KIT
ECU, but every electronic control does
not work without the connection.
•
Do not disassemble the Hydraulic unit
assy.
PART NAME
WIRE, SUB-LEAD
– 7 –
Q'TY REMARKS
1 SCU
R1 EN2911 2019Rev