Related Manuals for EvenCare G2
Summary of Contents for EvenCare G2
- Page 1 BLOOD GLUCOSE MONITORING SYSTEM Healthcare Professional Operator’s Manual Operator’s Manual & In-Service Guide...
- Page 2 BLOOD GLUCOSE MONITORING SYSTEM Healthcare Professional Operator’s Manual Operator’s Manual & In-Service Guide...
-
Page 3: Table Of Contents
15–16 IN-SERVICE GUIDE IN-SERVICE TRAINING OPERATOR CERTIFICATION CHECKLIST SELF TEST SELF TEST ANSWER KEY EVENCARE G2 BLOOD GLUCOSE MONITORING SYSTEM: NURSE IN-SERVICE TRAINING RECORD BLOOD GLUCOSE MONITORING SYSTEM: CERTIFIED INSTRUCTOR RECORD BLOOD GLUCOSE MONITORING SYSTEM: CERTIFIED INSTRUCTOR RECORD COMPETENCY CHECKLIST BLOOD GLUCOSE MONITORING SYSTEM: REVIEW OF NURSE’S TECHNIQUE... -
Page 4: Introduction
System to help monitor your patient’s blood glucose levels. The EVENCARE G2 Blood Glucose Monitoring System is designed to be accurate and easy to use. The EVENCARE G2 Blood Glucose Monitoring System is intended for both lay use by people with... -
Page 5: Meter Overview
G2 METER OVERVIEW TEST STRIP PORT EVENCARE G2 Insert test strip to turn on the meter METER FRONT METER DISPLAY Shows your blood glucose test results, memory values, averages, and other messages ENTER ( ) and ▲▼BUTTONS Press and hold Enter (... -
Page 6: Meter Display Screen
Displays the date, time, AM/PM, or for testing type of day averages (7, 14 or 30) code code SYSTEM SPECIFICATIONS Test Strips: EVENCARE G2 Blood Glucose Test Strips Test Range: 20–600 mg/dL Calibration: Plasma Test Time: 6 Seconds Sample Size:... -
Page 7: Evencare G2 Control Solution Testing
EVENCARE G2 CONTROL SOLUTION TESTING The purpose of the control solution testing is to make sure the EVENCARE G2 Meter and the EVENCARE G2 Test Strips are working properly You should perform a control solution test when: » Using the meter for the first time »... - Page 8 /dL Do not reuse test strips Step 8. Take out an EVENCARE G2 Test Strip from the test strip bottle and close the bottle immediately Insert the test strip to turn on the meter Step 9. Wait until the flashing blood drop and arrow icons appear on the meter display screen The meter will also announce, “Please apply blood onto the test strip”...
-
Page 9: Blood Glucose Testing
A new pair of clean gloves should be worn by the user before testing each patient Step 1. Take out an EVENCARE G2 Test Strip from the test strip bottle and close the bottle immediately Insert the test strip to turn on the meter IMPORTANT »... -
Page 10: Understanding Test Results
UNDERSTANDING TEST RESULTS Blood glucose values will vary depending on food intake, medication, health, stress, and exercise The ideal range for adults with and without diabetes should be » 70 to 100 mg/dL before meals » 70 to 140 mg/dL after meals If the meter displays a result that is “HI”... -
Page 11: Using The Meter Memory
The EVENCARE G2 Meter automatically stores up to 300 glucose test results together with the date and time The meter also provides 7, 14 and 30 day averages to help track a patient’s blood glucose trend The time and date... -
Page 12: Cleaning And Disinfecting
» DO NOT try to clean the test strip holder » DO NOT take the EVENCARE G2 Meter apart Doing so will void the warranty If there are technical problems or questions in the use of the meter, contact Medline Technical Service Center at 1-866-274-2131 between 8:00 am and 5:00 pm (Central Time), Monday through Friday »... - Page 13 4. To disinfect the meter, clean the meter with one of the validated disinfecting wipes listed below Other EPA registered wipes may be used for disinfecting the EVENCARE G2 system, however these other wipes have not been validated and could affect the performance of the meter »...
-
Page 14: Changing The Batteries
Batteries need to be changed when the icon appears on the meter display MATERIALS YOU WILL NEED: » Two Alkaline AAA Batteries » EVENCARE G2 Meter Step 1. Press firmly on the battery cover and slide in the direction of the arrow code Step 2. -
Page 15: Troubleshooting
This section details the significant display screen messages and error codes you will mmol/dL mol/dL mmol/dL mol/dL mg /dL encounter when using your EVENCARE G2 Meter and EVENCARE G2 test strips WHAT THE mg /dL WHAT YOU code mg /dL... - Page 16 /dL WARRANTY The EVENCARE G2 Blood Glucose Meter is warranted to be free of defects in workmanship and materials for a period of five (5) years from the date of purchase Medline’s liability for warranty claims is limited to repair or replacement, and in no event shall Medline be liable for indirect or consequential damages,...
-
Page 17: In-Service Guide
IN-SERVICE GUIDE The success of any bedside glucose-monitoring program depends on having consistent, well-documented methods, and procedures for testing and recording results. This easy-to-follow guide* will help you develop a strong, successful program. *This in-service guide is optional and is provided to your facility only as an additional resource should you choose to use it... -
Page 18: In-Service Training
IN-SERVICE TRAINING At the conclusion of an EVENCARE G2 Meter in-service training session, attendees should be able to do the following: 1 Identify and describe all components of the EVENCARE G2 Blood Glucose Monitoring System including: » Test strip port »... -
Page 19: Operator Certification Checklist
CERTIFIED INSTRUCTOR: Complete one checklist for each operator-trainee Before signing this checklist, the trainee must meet objectives as listed below A. Familiarization with Components of the EVENCARE G2 Blood Glucose Monitoring System 1. EVENCARE G2 Meter □ Features (test strip port, battery compartment and screen) □... -
Page 20: Self Test
The test strip vial should be closed immediately after taking a test strip out of the vial to avoid any degrading or contamination of the strips 6 How long is the test time on the EVENCARE G2 meter? 7 Where can you find information to troubleshoot error messages? a User’s Guide... -
Page 21: Self Test Answer Key
EVENCARE G2 needs to be calibrated/coded 2 What is the purpose of testing with Control Solutions? To validate that the EVENCARE G2 Meter is working properly with the test strips. 3 When performing a control solution test, you should: a Apply the control solution direct from the bottle to the test strip b. -
Page 22: Evencare G2 Blood Glucose Monitoring System: Nurse In-Service Training Record
EVENCARE G2 BLOOD GLUCOSE MONITORING SYSTEM: NURSE IN-SERVICE TRAINING RECORD The healthcare professionals listed below have been trained to use the EVENCARE G2 Blood Glucose Monitoring System: Certified Trainer’s Name HEALTHCARE DATE UNIT/STATION CERTIFIED TRAINER’S INITIALS PROFESSIONAL’S NAME... -
Page 23: Certified Instructor Record
The following individuals have undergone the appropriate training on the EVENCARE G2 Blood Glucose Monitoring System and are certified to serve as instructors in blood glucose monitoring using the EVENCARE G2 Blood Glucose Monitoring System They are qualified to perform initial training of Certified Operators, conduct performance... -
Page 24: Certified Instructor Record Competency Checklist
1 Select and prepare the finger-stick site correctly □ □ 2 Use lancet/lancing device correctly □ □ 3 Insert EVENCARE G2 Test Strip into EVENCARE G2 Meter correctly □ □ 4 Apply blood to test strip correctly □ □ 5 Dispose of lancet correctly □... -
Page 25: Review Of Nurse's Technique
EVENCARE G2 BLOOD GLUCOSE MONITORING SYSTEM: REVIEW OF NURSE’S TECHNIQUE CERTIFIED TRAINER’S NURSE’S DATE CERTIFIED TRAINER NURSE REVIEWED SIGNATURE SIGNATURE... -
Page 27: Blood Glucose System Performing A Control Solution Test
• Write down the date when the control solution is first opened. Discard three months after the date of the first opening. • For more information on performing a control solution test, see EvenCare G2 User’s Guide or call Customer Support at 1-866-274-2131. -
Page 28: Glucose Test Strip Package Insert
EVENCARE G BLOOD GLUCOSE TEST STRIPS/TIRAS REACTIVAS DE GLUCEMIA EVENCARE Sampling End/Extremo de Muestreo ® ™... -
Page 29: Glucose Control Solution Package Insert
EVENCARE G GLUCOSE CONTROL SOLUTIONS/SOLUCIONES DE CONTROL DE GLUCOSA EVENCARE Sampling End/Extremo de Muestreo ® ™ www.medline.com ©2016 Manufactured for Medline Industries, Inc Made in Taiwan for/Fabricado en Taiwan por: Medline Industries, Inc , Mundelein, IL 60060 USA 1-800-MEDLINE RH16APB... - Page 30 Some products may not be available for sale in Mexico or Canada We reserve the right to correct any errors that may occur within this brochure ©2017 Medline Industries, Inc All rights reserved Clorox Healthcare and Dispatch are registered trademarks of The Clorox Company G2, Micro-Kill and Micro-Kill+ are trademarks...
Need help?
Do you have a question about the G2 and is the answer not in the manual?
Questions and answers