Rogers Nextbox 2.0 Easy Installation Manual

Coaxial Cable Connection: This connection uses a Coaxial cable, provided by Rogers.
A
Connect the end of the Coaxial cable coming from your wall to the
CABLE IN port. Next, connect one end of the provided Coaxial cable to
the TO TV/VCR port.
Note: Be sure to securely fi nger tighten all cable connections. Note
: Be sure to securely fi nger tighten all cable connections.
B
Connect one end of the power cord to the
back of the digital box and the other end to
the wall outlet.
Note: To ensure the digital box remains authorized Note : To ensure the digital box remains authorized
and updated, keep the power cord and Coaxial cable and updated, keep the power cord and Coaxial cable
connected at all times. connected at all times.
Turn your TV on and set it to Channel 03.
Most TVs can be connected Most TVs can be connected
to multiple video sources like to multiple video sources like
DVD players and VCRs. To DVD players and VCRs. To
view programming from your view programming from your
digital box, your HDTV digital box, your HDTV
must be set to the input must be set to the input
selected in Channel 03 Channel 03.
selected in
Change your TV to Channel 03 by Change your TV to Channel 03 by
using your TV's remote control using your TV's remote control or the
channel buttons on your TV. channel buttons on your TV.
C
In addition to operating the digital box, the Rogers remote is capable of controlling basic commands on your TV, DVD, and other devices. To enable these features, the
Rogers remote must be programmed for your particular home entertainment components.
First, program the Rogers remote for your TV.
Since the Rogers remote control is a universal remote, you can
program it for other components by repeating the steps and
substituting the TV button with the respective device button (VCR,
DVD, etc.).
1. Turn your TV on.
2. Press the TV button.
3. Press and hold SETUP
fl ashes twice.
4. Press 9 - 9 - 1, the TV button fl ashes twice.
5. Point the remote towards your TV and press
PWR.
6. Repeatedly press and release the
button until your TV turns off. The remote
will cycle through all possible codes until a
match is found.
Note: You may need to press the
button dozens of times before fi nding a
match.
7. Once the TV turns off, press the
button to lock the code. The TV button will
fl ash twice.
8. Confi rm the correct code was locked by
pressing the PWR button to turn on your
TV.
What if this did not work?
Your remote also came with a small user guide that contains specifi c
instructions for programming popular components. Consult the user
guide for futher instructions.
Standard Defi nition
Easy Installation Guide
Installing your Rogers digital box is as easy as A - B - C.
A: Connect The Digital Box To Your TV
B: Authorize The Digital Box
C: Program Your Rogers Remote And Additional Options

Connect The Digital Box To Your TV

Authorize The Digital Box

With your TV turned off and your Rogers
remote pointing towards the digital box, press
the
or the
Program Your Rogers Remote And Additional Options
until the TV button
CH+
CH+
SETUP
Connect the other end of the Coaxial cable to the Coaxial port on the
back of your TV.
From Digital Box From Digital Box
CBL then PWR buttons on the remote.
Note:
Your Rogers remote cannot be
used to change the TV input
until it has been programmed
to control your TV
Next, set your Rogers remote to control the volume.*
By default, the Rogers remote is programmed to raise and lower the
volume of the digital box. These steps will set the remote to use your
TV to control he volume instead.*
TIP: For the best audio control, ensure your volume is set to Fixed in
the audio settings menu. Make sure you set the volume to maximum
on the digital box.
* Not compatible with older TVs with manual volume control.
Are you installing the digital box
yourself?
• • YES YES: Continue to : Continue to Step 2
• • NO NO: A : A technician technician installed it, go to
Section C Section C below. below.
Wait 10 minutes for the digital box to become
active and to be updated with your channel
packages.
Confi rm the digital box is authorized.
Turn on the digital box by pressing PWR
1. 1. Turn on the digital box by pressing
Rogers remote. Rogers remote.
Change the channel to 03 by pressing 0
2. 2. Change the channel to 03 by pressing
your Rogers remote. your Rogers remote.
Is Channel 03 being displayed? Is Channel 03 being displayed?
• • Yes: Continue to Yes : Continue to Section C Section C on the reverse of this
guide. guide.
• • No: Channel 03 is "Not Authorized". No
: Channel 03 is "Not Authorized".
Call Call 1 866 894 9962 1 866 894 9962 to have the digital box to have the digital box
authorized. You will be asked for the phone authorized. You will be asked for the phone
number associated with your account. number associated with your account.
1. Press the CBL button.
2. Press and hold SETUP until the
fl ashes twice.
3. Press 9 - 9 - 3, the CBL button fl ashes twice.
4. Press the TV button. The CBL button will
blink twice to confi rm a valid selection.
5. Check that your changes were accepted by
testing the volume controls on the remote.
6. If you see the digital box volume bar instead
of your TV volume bar, your changes were
not successful. Repeat these instructions
beginning at Step 1.
Step 2.
installed it, go to
PWR on the
on the
0 - - 0 0 - - 3 3 on
on
on the reverse of this
CBL button